Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Upload PTO/PWM program

Created by: akbar_torkashwand at: 6/30/2024 2:23 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

6/30/2024 2:23 PM	Rate (0)
akbar_torkashwand Bronze Member Joined: 6/14/2015 Last visit: 11/14/2024 Posts: 243 Rating: (2)	I have program that control stepper motor.I uploaded program from PLC .but I can not find any PTO program.Also I do not find Q0.0 in program.Is it possible to upload PTO program from PLC? I have uploaded program Attachment program.zip (418 Downloads)
	Last edited by: akbar_torkashwand at: 06/30/2024 14:29:34
Suggestion To thank Quote Answer

6/30/2024 8:26 PM	Rate (0)
Henry1675 Bronze Member Joined: 3/9/2018 Last visit: 11/8/2024 Posts: 192 Rating: (15)	Try get a "Create Data Block from Ram" from the PLC to see if you get more info out of the created Data Block. If not, you need to get the info from the program.
	Last edited by: Henry1675 at: 06/30/2024 20:44:43
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on