Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Using non-Siemens failsafe I/O

Created by: simoncocker at: 2/1/2022 3:18 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

2/1/2022 3:18 PM	Rate (0)
simoncocker Regular Member Joined: 1/26/2006 Last visit: 9/2/2024 Posts: 6 Rating: (0)	Hi, Any experience of using non-Siemens failsafe remote I/O connected to a Siemens S7-1500 failsafe CPU for safety functions? I cannot get failsafe analog inputs until October so looking at alternatives. How is the I/O read from the remote I/O available for use in the safety program? Thanks

Suggestion To thank Quote Answer

2/1/2022 3:44 PM	Rate (0)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 11/11/2024 Posts: 12293 Rating: (2691)	Hello simon; If your 3rd-party F-IO allows a Profinet connection and comes with its own GSDML file, then you can integrate it in your S7-1500 Safety Advanced configuration: https://support.industry.siemens.com/cs/ww/en/view/54110126/138931753995 Examples (you can find more Profinet F-IO modules on the web) https://www.turck.de/datasheet/_en/edb_6814053_gbr_en.pdf https://www.pilz.com/en-INT/products/controllers/i-o-systems Hope ths helps,, Danie; Chartier Attachment 3rd-party F-IO over Profinet-Profisafe.jpg (397 Downloads)
	Last edited by: dchartier at: 02/01/2022 15:46:57
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on