Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Wiring the encoder to CPU313

Created by: Olof at: 4/10/2007 11:53 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

4/10/2007 11:53 AM	Rate (0)
Olof Posts: 5 Rating: (0)	Hi, I wounder where I can find information about wiring an encoder to a CPU313? 6ES7 313-6CE01-0AB0 Work memory 32KB; 0,1ms/1000 instructions; DI16/DO16 integrated; 3 pulse outputs (2.5kHz); 3 channel counting and measuring with incremental encoders 24V (30kHz); MPI+ DP connector (DP-Master oder DP-Slave); multi-tier configuration up to 31 modules; Send and receive capability for direct data exchange; constant bus cycle time; routing; S7 Communication (loadable FBs/FCs); Firmware V2.0; also available as SIPLUS module with order number 6AG1 313-6CE01-2AB0
Olof Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

4/10/2007 3:38 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 11/13/2024 Posts: 8768 Rating: (1171)	Hi Olof, Here is a link to manual: http://support.automation.siemens.com/WW/view/en/12429336 Hope it will be usefull. Best regards, Wizard

Suggestion To thank Quote Answer

4/11/2007 9:59 AM	Rate (0)
Smurf Silver Member Joined: 9/28/2005 Last visit: 10/24/2024 Posts: 414 Rating: (28)	Hi, Another nice feature of the site Wizard is pointing you is the Infolink, here is where the sample programs are that are mentioned in the technical functions manual.
	Smurf "The only difference between a problem and a solution is that people understand the solution."
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on