Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

H-system with CP1612

Created by: ShahinM at: 5/25/2006 9:15 AM (14 Replies)

Rating (0)

Thanks 0

Result pages:: |; 1 | 2; |

15 Entries

Entries per page: 10 | all

7/5/2006 2:00 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello SM, the ESM TP 80 can be used, no doubt. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

7/6/2006 10:30 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	[quote user="SM"]Is there any solution that each HMI can access to both CPU with CP1612? Have you seen my solution with the MP370 on both H-CPUs, maybe that it is also working for this solution... [:o]
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

7/9/2006 9:37 AM	Rate (0)
ShahinM Silver Member Joined: 11/8/2005 Last visit: 6/5/2024 Posts: 335 Rating: (3)	Hello Late, Where can I find your solution with MP370 and H-system?

Suggestion To thank Quote Answer

7/9/2006 1:49 PM	Rate (0)
Tomcat Posts: 433 Rating: (48)	Hello SM, I believe Late means this: Put a MP370 on a H-System with Ethernet. Regards Tomcat
Tomcat Posts: 433 Rating: (48)
Suggestion To thank Quote Answer

7/9/2006 6:25 PM	Rate (0)
Late Platinum Expert Joined: 1/7/2006 Last visit: 11/17/2023 Posts: 2705 Rating: (318)	[quote user="SM"]Where can I find your solution with MP370 and H-system? Hello, Thats the one... [:)]
	I hope that the answer will help, if you have still questions, don't hesitate to ask me. All the best, Late Never say never, think in solutions, not in trouble......
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on