Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

802d sl with mm4

Created by: Geng at: 7/18/2010 7:58 PM (5 Replies)

Rating (2)

Thanks 1

6 Entries

7/18/2010 7:58 PM	Rate (0)
Geng Advanced Member Joined: 11/22/2008 Last visit: 10/28/2024 Posts: 40 Rating: (0)	Hello I have system with 802d sl and Spindel motorwhich is controlingbymm4 with profibus connection I want to use load meter on my screen does anybody know which paremeters will i adjust on 802d sl and mm4 Best Regards
	Last edited by: Geng at: 7/18/2010 7:59 PM
Suggestion To thank Quote Answer

7/19/2010 5:33 AM	Rate (0)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 10/5/2023 Posts: 333 Rating: (51)	hi do you have an encoder for the same? with regards ram

Suggestion To thank Quote Answer

7/19/2010 6:43 PM	Rate (0)
Geng Advanced Member Joined: 11/22/2008 Last visit: 10/28/2024 Posts: 40 Rating: (0)	Yes i have two encoder. one of them is on motor 1000 p/revdirect coupling the other one on load 2000 p/rev direct copling. Still i did not find any paremeters BR

Suggestion To thank Quote Answer

7/20/2010 9:35 AM	Rate (2)
Ekalavya Posts: 2964 Rating: (484)	Hello... You can able to see the parameter in display MD( 360,363,365,366). I am attaching you the procedure and steps how to do this.... check it out.... Rgds, Attachment Display_spindle_load_meter_802Dsl.pdf (146 Downloads)
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ramsha

7/20/2010 6:56 PM	Rate (0)
Geng Advanced Member Joined: 11/22/2008 Last visit: 10/28/2024 Posts: 40 Rating: (0)	Thanks Ekalavya This information great for me but i need to know another information where these datas came from in these md just for display data is there any channel, machine or axis data to adjust and do you know any paramter mm4 for adjusting Br

Suggestion To thank Quote Answer

7/21/2010 7:50 AM	Rate (0)
Ekalavya Posts: 2964 Rating: (484)	No need to adjust any parameter in channel MD/Axis MD. Only you need to do it in display MD As i understand there is no paramter for adjusting MM4 for the spindle load meter. Rgds,
Ekalavya Posts: 2964 Rating: (484)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on