1/18/2016 8:46 AM | |
Joined: 7/7/2015 Last visit: 9/4/2023 Posts: 55 Rating:
|
In my program, structure variable 'PI', 'PO' is transfered. In, 'PI' Photo, 'SetPoint_Speed' is Motorspeed. But when I download and cycle program, 'SetPoint_Speed' is raise, but motor doesn't act. Attachmentphoto.zip (107 Downloads) |
1/19/2016 8:43 AM | |
Joined: 7/7/2015 Last visit: 9/4/2023 Posts: 55 Rating:
|
Thank you. IN ControlPanel, I check enable and click green button, the bit are be enable. Then I run PLC But, Motor doesn't roate. Is it right make bits enable via ControlPanel?
Attachmentphoto.zip (105 Downloads) |
1/19/2016 9:45 AM | |
Joined: 7/7/2015 Last visit: 9/4/2023 Posts: 55 Rating:
|
Ok. But I know n>0, motor rotate. I just wander How rotate without ControlPanel, by only PLC and programming... Thank you. |
2/16/2016 8:15 AM | |
Joined: 7/7/2015 Last visit: 9/4/2023 Posts: 55 Rating:
|
The bits, I changed by my program S7. There is no error. I read S110 List manual. AttachmentPhotos.zip (110 Downloads) |
Last edited by: Ssung at: 2/16/2016 8:17:05 AM |
|
Follow us on