Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Alarm logging (Change the auto-acknowledgement message status)

Created by: eric57 at: 5/9/2011 3:07 PM (5 Replies)

Rating (0)

Thanks 0

6 Entries

5/9/2011 3:07 PM	Rate (0)
eric57 Posts: 9 Rating: (0)	Hello, if I have a alarm and it desapear without my acknowledgement. The next alarm messagecome automatically with a auto-acknowledgement (System make a acknowledgement and 1ms later I become the alarm) And I would like to change the word in this status for every auto-acknowledgement . Is that possible? For a normal acknowledgement, I can change in "alarm Class" and "text Class" But for a auto-acknowledgement ? Thank you
eric57 Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/10/2011 11:29 AM	Rate (0)
efka Posts: 799 Rating: (43)	Dear eric57, I think you mean, that an alarm message is auto acknowledged, when the alarm comes up a second time, while the first alarm wasn't acknowledged at the moment. Is that right? If yes, I think you mean the "QS"-state of the alarm. This means, that the alarm was acknowledged by the system, because an alarm can't come up a second time, while the first alarm (the same one) isn't acknowledged. Can you follow? But this text, I think "QS", can't bechanged by the user. best regards
efka Posts: 799 Rating: (43)
Suggestion To thank Quote Answer

5/10/2011 4:39 PM	Rate (0)
eric57 Posts: 9 Rating: (0)	Yes but in french it's very long... I receive "Acquittement systeme" ant it s long :/ It s possible to modify it in a .ini file ?
eric57 Posts: 9 Rating: (0)
Suggestion To thank Quote Answer

5/10/2011 4:46 PM	Rate (0)
efka Posts: 799 Rating: (43)	eric57 It s possible to modify it in a .ini file ? I don't think so!
efka Posts: 799 Rating: (43)
Suggestion To thank Quote Answer

12/1/2016 2:52 PM	Rate (0)
Yazan Posts: 8 Rating: (0)	Hey there, I've reinstalled WinCC and this "auto-acknowledgement" behavior started. How can I turn it off ?? I don't want it to acknowledge anything automatically. Thanks
Yazan Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

10/11/2018 11:49 AM	Rate (0)
BruceBacc Experienced Member Joined: 6/12/2018 Last visit: 3/6/2024 Posts: 42 Rating: (3)	I have the same problem : does someone have an answer ? If an alarm appear, then disappear from PLC without being acknowledged by user (Auto-acknowledge), then it shows 'Acknowledment - System'. I've searched in many places inside WINCC (TIA V15 PRO), but was not able to find location where to change this label....

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Alarms Messages

Follow us on