Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Alarm SubSystem in WINCC v6.2

Created by: SN_2007 at: 8/3/2007 7:30 AM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/3/2007 7:30 AM	Rate (0)
SN_2007 Member Joined: 8/3/2007 Last visit: 8/8/2007 Posts: 4 Rating: (0)	In a step7 project when system Messages are configured in Hardware configuration and then a simatic PC station with an O.S is added. On Compiling the O.S for Tags and messages , some invalid messages are getting added in Alarm Configuration. Any Reasons for this??

Suggestion To thank Quote Answer

8/7/2007 3:40 PM	Rate (0)
April Posts: 1776 Rating: (95)	Hi, Don´t know. But maxbe You can find some explanations in this FAQ http://support.automation.siemens.com/WW/view/en/22020845 Best regards April
April Posts: 1776 Rating: (95)
Suggestion To thank Quote Answer

8/8/2007 5:01 AM	Rate (0)
SN_2007 Member Joined: 8/3/2007 Last visit: 8/8/2007 Posts: 4 Rating: (0)	Hi, Thanks I was able to compile & DownLoad without errors

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on