Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Alarms refresh MP377 / 319FCPU AlarmD

Created by: Sims at: 9/28/2009 2:28 AM (2 Replies)

Rating (0)

Thanks 1

3 Entries

9/28/2009 2:28 AM	Rate (0)
Sims Advanced Member Joined: 5/23/2008 Last visit: 9/12/2024 Posts: 19 Rating: (0)	Hi, Ihave a MP377 HMI connected to a 319F CPU. I have created an alarm block using AlarmD SFC107. I have since added new alarms but they will not show up in the HMI when triggered. The other existing alarms in the alarm block work as normal. The steps Ihave takenare, 1. Added a new EV_ID in the IN block interface. Data Type is DWord. Attributes are S7_a_type/alarm_s and S7_server/alarm_archiv. 2. Added SFC107 function in the block with newly created EV_ID. 3. Defined the trigger bits. 4. Saved Block. 5. Re-created instance data block for Alarm Block. 6. Downloaded new Alarm Block and Instance Data Block to PLC. 7. Synchronised HMI project with new S7 project. Compiled new HMI porject. 8. Downloaded new HMI project to MP377. 9. Triggered the new alarm. 10. Alarm dows not show in AlarmView. Any help is appreciated. Thanks.
	Last edited by: Sims at: 9/28/2009 2:28 AM
Suggestion To thank Quote Answer

9/28/2009 10:37 AM	Rate (0)
The Brain Gold Member Joined: 10/19/2005 Last visit: 11/30/2020 Posts: 1611 Rating: (121)	Hi, i did not use Alarm D before, but maybe this FAQ could be helpful for you. -> http://support.automation.siemens.com/WW/view/en/24013249 regards,

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Sims

9/29/2009 12:25 AM	Rate (0)
Sims Advanced Member Joined: 5/23/2008 Last visit: 9/12/2024 Posts: 19 Rating: (0)	Thanks for the link. I used to FAQ to originally develop the alarm block. The problem I have is the addition of new alarms to the alarm block. The new CPU orientated message number is generated by the block when creating the instance Data Block. Should it be as simple as re-compiling the HMI project and downloading to the MP377? I'm not sure when or how the new Message Configuration is applied to the HMI and or PLC CPU.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on