Industry Online Support
Technical Forum
Navigation
Rating 
Thanks 0
| 9/22/2008 11:02 PM | |
|
Posts: 672 Rating:
|
Hi, Have you got the password active when transfering in normal mode ? |
| 9/23/2008 7:50 PM | |
|
Posts: 14 Rating:
|
no i dont have password, how i use a password and where? |
| 9/23/2008 10:11 PM | |
|
Posts: 672 Rating:
|
HI, In normal mode press the eyeball key and 1111 "ENTER" they go back to DATA IN/OUT |
| 9/23/2008 10:36 PM | |
|
Posts: 14 Rating:
|
thank very much in the next time i try |
| 9/24/2008 8:46 PM | |
|
Posts: 14 Rating:
|
Have a little question, it's possible that without the info of the Tea1 and Tea2 file the axis borad are power off? Thanks |
| 9/25/2008 11:06 PM | |
|
Posts: 672 Rating:
|
Hi, Your axes won't move without correct data loaded. You may also need to load the plc. WHen the system is corrupt the plc also gets corupt so no axis movements |
| 9/27/2008 2:46 PM | |
|
Posts: 14 Rating:
|
For load the Plc you intend the two file TEA1 e TEA2 or the s5 program? |
| 9/28/2008 10:39 AM | |
|
Posts: 672 Rating:
|
Hi, Either a text file %PCP which is a hex dump of the plc, or the S5 program if you have an S5 programming device or software. |
Follow us on