AO didn't give output

hi fernando13,

how is the module wired and parametrized?

regards,

When you adjusted the hardware configuration to your module, what exactly did you do next?

Hopefully you can say, I right clicked on the PLC from the portal project tree and selected "Download hardware" (or something like that).

If you did not do that, please do it now. 

fernando13

Hi guys

hello everyone i have some problem i have AO module 6ES7232-4HD32-0XB0 this type 4 channel AO, and you can config to out Volt or Amp, the problem come when i choose current output, i try modify the value using watch or force table in TIA V14 SP1, but the current still give 4 mA and when i modify the value to 0 the module give 0 mA, i config the module to 4-20 mA current output, but still the value did't corrent. please help me. must the wiring differrent from voltage cause i using voltage wiring type for current output. Thanks

To rephrase what I think you said, in the watch table, you cannot get it to work like this:

QW64

But this works:

QW64:P

Duris_I

Hello,

maybe next hint to other guys, generally direct output to Analog via Watch table doesn't work, you can better set some free WORD memory and then set somewhere in code your analog output with mentioned WORD mmeory. Then set that WORD memory with value as you require for AO. Another hint can be use of :P with analog output TAG. This can work.