Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Backup OP177B

Created by: Figueirinhas at: 2/12/2015 7:15 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

2/12/2015 7:15 PM	Rate (0)
Figueirinhas Posts: 2 Rating: (0)	Good afternoon, I have a OP 177B panel damaged and I intend to make the program to a new one, but the memory card is not recognized by the panel. How much is the maximum card size that the panel accepted? What can I do? Thank U
Figueirinhas Posts: 2 Rating: (0)
Suggestion To thank Quote Answer

2/14/2015 9:59 AM	Rate (0)
alessandro1911 Regular Member Joined: 9/6/2012 Last visit: 10/10/2024 Posts: 19 Rating: (0)	hello i suggest you to use prosave, on ths case is not necessary any memory, possible doing backup to your pc

Suggestion To thank Quote Answer

2/16/2015 3:39 PM	Rate (0)
Murof Platinum Expert Joined: 8/3/2009 Last visit: 11/5/2024 Posts: 14087 Rating: (1766)	Hello Figueirinhas The sizes and types of the memory cards for Simatic Panel you can find in the following FAQ: http://support.automation.siemens.com/WW/view/en/21847868 You can also use Prosave as already suggested. I hope it helps you. Have a nice day Bye Murof
	If this Information really helps, you could use the Rate function
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on