Can't stop the compressor.

petr_sipor

hi,

write what the SET parameter is there

 Hi

Pls find below the parameters

P0700 - 5,2,2

P0701 - 0

P0702 - 0

P0719 - 0

P1000 - 5,3,3

P1080 - 30.27

P1082 - 148.83

P1300 - 3,2,3

My issue is that i can start the compressor. But, i can't stop the compressor. Pls advice.

Thanks

 HI All

I have an Atlas Copco GA45VSD with a Micomaster 440 (6SE6440-2UD35-5FA1) with Cubicle # 9820-3549-0304.

CAN ANYONE HELP ME WITH THE PARAMETER LIST FOR THIS MM440 INVERTER? 

I have the following issue with the inverter. I can run the compressor motor through the start button. But, I can't stop the motor with the stop button. The display on the Elektronikon II shows program stop but the motor keeps running!

MM440 using DI1(ter5) and DI2(ter6) and Terminal 29&30(Comm link).

THANKS 

sarakano

 

petr_sipor

hi,

write what the SET parameter is there

 Hi

Pls find below the parameters

P0700 - 5,2,2

P0701 - 0

P0702 - 0

P0719 - 0

P1000 - 5,3,3

P1080 - 30.27

P1082 - 148.83

P1300 - 3,2,3

My issue is that i can start the compressor. But, i can't stop the compressor. Pls advice.

Thanks

Hi Mate,

Here you go.

MM4_Getting_Started_Guide_0222_A5E02779537A_AH_150222.pdf - MICROMASTER 420/430/440 - ID: 109810592 - Industry Support Siemens

hi,

in the electron Mk(x), set the same reference values of frequency and minimum revolutions as in the converter.

(what's the problem with writing what the set parameter is there - it's stuck at the BOP on the converter)