Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Cannot access the project path

Created by: rdoliveira at: 6/22/2016 2:34 PM (18 Replies)

Rating (13)

Thanks 20

Result pages:: |; 1 | 2; |

19 Entries

Entries per page: 10 | all

6/22/2016 2:34 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 9/25/2023 Posts: 1373 Rating: (133)	I have a IPC677D. I do not know what can be. My user is in the group "SIMATIC HMI" Attachment Sem título.png (1520 Downloads)
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

6/22/2016 3:17 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 9/25/2023 Posts: 1373 Rating: (133)	rdoliveira I have a IPC677D. I do not know what can be. My user is in the group "SIMATIC HMI" User Attachment usu.png (1857 Downloads)
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

6/22/2016 5:01 PM	Rate (0)
H.J. Gold Member Joined: 6/3/2014 Last visit: 1/17/2023 Posts: 660 Rating: (187)	Hello rdoliveira, you are just trying to compile the project, not to load the RT file somewhere at the same time, yes? Where do you run your WinCC TIA Engineering? On the IPC or on another PC/PG? Is your project path on a harddrive or a removable memory device? Can you save the project without problems?
	~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ★ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~ ~
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users rdoliveira

6/28/2016 6:35 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 9/25/2023 Posts: 1373 Rating: (133)	re-installed the TIA and that's OK.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

12/9/2016 1:31 PM	Rate (0)
JeroenKeizer Posts: 4 Rating: (0)	i have the same problem, i can save the project. the problem is when i push on compile the error : Cannot compile. Cannot access the project path. I use TIA portal v13 sp1 wincc professional RT
JeroenKeizer Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

4/21/2017 4:15 PM	Rate (0)
nihanth Experienced Member Joined: 1/30/2012 Last visit: 1/11/2023 Posts: 25 Rating: (0)	i have the same problem, i can save the project. the problem is when i push on compile the error : Cannot compile. Cannot access the project path. I use TIA portal v14
	Last edited by: nihanth at: 4/21/2017 4:16:32 PM
Suggestion To thank Quote Answer

5/13/2017 4:25 AM	Rate (12)
zachn Posts: 1 Rating: (12)	Right mouse on HMI folder >Compile>Rebuild All, should take care of it.
zachn Posts: 1 Rating: (12)
Suggestion To thank Quote Answer
This contribution was helpful to 17 thankful Users KonradO PimSiemens Lillquist grrrrrroooo Jackcaress demirten08 kohcocrunch JanPetersen dan.v. AutoGen_7507820 Neil_Lucas faubts17 guneygucenmez AntonioBall WojBar erdemustunel PSasin

5/13/2017 9:27 AM	Rate (0)
Nattana Posts: 59 Rating: (10)	Make sure that on the station/pc with runtime, the destination folder exists. You need an empty folder there.
Nattana Posts: 59 Rating: (10)
Suggestion To thank Quote Answer

8/11/2017 4:54 PM	Rate (0)
josepvr Experienced Member Joined: 1/23/2017 Last visit: 1/19/2023 Posts: 49 Rating: (0)	I've fixed creating an empty project and copy/paste devices from old one.
	Last edited by: josepvr at: 8/11/2017 5:12:51 PM
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users grrrrrroooo kohcocrunch

2/11/2019 11:20 PM	Rate (0)
leigh_tm Regular Member Joined: 11/4/2016 Last visit: 7/7/2023 Posts: 3 Rating: (0)	I have encountered this problem a few times, which I have been usually able to resolve by hitting the 'compile all' before simulating/deploying the project :)

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Installation Options General

Follow us on