Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CAS configuration in WinCC do we need to use SIMATIC NCM PC Manager

Created by: Omkar Solaskar at: 9/23/2014 2:12 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

9/23/2014 2:12 PM	Rate (0)
Omkar Solaskar Regular Member Joined: 11/3/2010 Last visit: 10/18/2024 Posts: 9 Rating: (0)	During CAS configuration in WinCC (Redundant Server configuration) do we need to use SIMATIC NCM PC Manager..? Regards, Omkar Solaskar
	Last edited by: Min_Moderator at: 9/30/2014 9:16 AM New subject after splitting from /tf/WW/en/Posts/102116#top
Suggestion To thank

9/30/2014 9:19 AM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4766 Rating: (122)	Closed cause question posted twice. The second thread with the subjectCAS, necessary to configure project in Simatic NCM PC manageris published within the conferenceSIMATIC WinCC. Best regards Min_Moderator

Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

WinCC Installation Options General

Follow us on