Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Complete procedure of Uploading PLC S7 Project & program from PLC to PG

Created by: mmkhan at: 8/13/2010 4:52 PM (13 Replies)

Rating (8)

Thanks 22

Result pages:: |; 1 | 2; |

14 Entries

Entries per page: 10 | all

8/13/2010 4:52 PM	Rate (0)
mmkhan Bronze Member Joined: 9/28/2007 Last visit: 9/27/2022 Posts: 224 Rating: (11)	Dear Experts 1- I want to know about the complete procedure step by step of uploading plc project and program etc from plc to my pg. 2- i want to also know how i can take print(hard copy) of ladder diagram etc. from above upload project. 3- i also want to print cross refrences with symbols. 4- i want program print in ladder(LAD) format not in STL .
	Muhammad Munir Electronics Engineer
Suggestion To thank Quote Answer

8/13/2010 5:08 PM	Rate (1)
dchartier Grandmaster-Expert Joined: 9/27/2006 Last visit: 9/30/2023 Posts: 12153 Rating: (2624)	Hello 256; With this type of question, I can only really suggest you take a few minutes and study the Programming with Step 7, v. 5.4 reference manual: http://support.automation.siemens.com/WW/view/en/18652056 Chapter 19 is dedicated to downloading amnd uploading procedures. Chapter 24 presents printing and archiving with Step 7. There is also the online help of Step 7 that can be immensely helpful for information on the different options in the Step 7 editors. Hint: if you need to print a program inladder, go to the program editor, view your program in LAD, and look for the File --¨Print menu... Hope this helps, Daniel Chartier

Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users PMG vadiEEE Diniz_

8/14/2010 11:53 AM	Rate (1)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 9/25/2023 Posts: 6822 Rating: (1349)	Hi please follow these steps: 1- create a new project 2- select the newly created project and in SIMATIC Manager PLC----> Upload station to PG 3-Wait till all blocks uploaded into offline data base Best Regards hdhosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users Diniz_ emacek User6996

4/25/2012 1:55 PM	Rate (1)
Mothilal Posts: 165 Rating: (25)	hi hdhosseini Can u explain that uploading proceedure in detail? Should we create a new project with actual hardware configuration? Note: I studied that manual .. But Iam expectingclear proceedure .. Thanks Regards Mothilal
Mothilal Posts: 165 Rating: (25)
Suggestion To thank Quote Answer

4/25/2012 2:43 PM	Rate (5)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 12/15/2022 Posts: 5697 Rating: (708)	Hello, Follow the attached Pdf. My CPU is a simulated one, so it looks a bit different. Note thatin your uploaded program there are no symbols, variable names and comments. Succes, Regards, Marcjan Attachment upload.pdf (6553 Downloads)
	Last edited by: Marcjan at: 4/25/2012 2:44 PM Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 10 thankful Users PMG chris_tec Everdyn GB vadiEEE sanshiro TanBak RetroK Diniz_ irfaneci grrrrrroooo

7/11/2013 2:49 PM	Rate (0)
vadiEEE Posts: 13 Rating: (0)	hi hdhosseini Can u explain that Downloading proceedure in detail, Iam expectingclear proceedure .. thnaks, vadi
vadiEEE Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

7/11/2013 3:22 PM	Rate (0)
MRG Bronze Member Joined: 1/20/2008 Last visit: 9/26/2023 Posts: 120 Rating: (7)	vadiEEE Can u explain that Downloading proceedure in detail, Iam expectingclear proceedure .. Hello, Follow these procedures: The First Method: 1. Open your project in SIMATIC Manager 2. In Option menu: select Set PG-PC Interface ... 3. In Interface Parameter Assignment field: select your interface (For example: PC Adapter, CP5611, or etc.) and set connection parameters for it. After that press OK! 4. In SIMATIC Manager Double click on Station (Same as "SIMATIC 300 Station") 3. Double click on Hardware to open HW Config 4. In Station menu, select save and compile 5. In PLC menu select Download 6. In Select Target Module windows, selectCPU module and press OK. 7. In Select Node Address Press OK or Press view to show all accessible nodes. 8. Now, hardware download is done. 9. Close HW Config! 10. In SIMATIC Manager Right click onBlocks, select PLC, select Download The Second Method: 1. Open your project in SIMATIC Manager 2. In Option menu: select Set PG-PC Interface ... 3. In Interface Parameter Assignment field: select your interface (For example: PC Adapter, CP5611, or etc.) and set connection parameters for it. After that press OK! 4. In SIMATIC Manager Right click on Station (Same as "SIMATIC 300 Station"), select PLC, select download. Regards, MRG
	Last edited by: MRG at: 7/11/2013 3:24 PM
Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users DS SURESH KUMAR Diniz_ irfaneci kerem_filyos

7/11/2013 3:23 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 6/21/2023 Posts: 4617 Rating: (701)	Hi vadi, You know the place connector for the CPU and the MPI address?

Suggestion To thank Quote Answer

7/11/2013 3:25 PM	Rate (0)
Ste39 Platinum Member Joined: 1/21/2013 Last visit: 6/21/2023 Posts: 4617 Rating: (701)	Hello Mothilal, Same question of vadi: You know the place for the CPU connector and the MPI address?

Suggestion To thank Quote Answer

7/11/2013 10:06 PM	Rate (0)
Ton Verra Gold Member Joined: 4/20/2007 Last visit: 8/30/2023 Posts: 724 Rating: (40)	I wonder why you post that question in an excisting topic. I guess this depends on your type of PLC. I use 300 series. MPI adress you will set in the HW config. Usually my PLC will get the adress 2. In my situation, the connector is placed under the litte "flap" under the CPU lights, not that hard to find.. As mentioned before, these are the basics of the Siemens PLC world. You might want to check out the step by step manuals mentioned in the earlier replies.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on