Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connection Failed- The selected online target could not be reached

Created by: Seelmann at: 7/2/2015 4:29 PM (54 Replies)

Rating (6)

Thanks 20

Result pages:: |; 1 | 2 | 3 | 4 | 5 |...; |

55 Entries

Entries per page: 10 | 20 | 50 | all

1/29/2016 7:57 AM	Rate (0)
Deleted User Posts: 767 Rating: (69)	Dear all! Picture attached is message error but i don't know remove error. PLC: 1214 AC/DC/Relay. Ver FW: 4.1. TIA V13 SP1 If i use another computer, i can download and reset factory. But if i use my computer, i can't online and download! Help me! Thank you! Attachment Untitled3.png (2467 Downloads)
Deleted User Posts: 767 Rating: (69)	Last edited by: vuongvuong1234 at: 1/29/2016 7:59:07 AM
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_6697710

1/29/2016 8:21 AM	Rate (0)
Deleted User Posts: 767 Rating: (69)	a
Deleted User Posts: 767 Rating: (69)	Last edited by: vuongvuong1234 at: 1/29/2016 8:52:44 AM
Suggestion To thank Quote Answer

1/29/2016 8:48 AM	Rate (0)
Duris_I Diamond Expert Joined: 4/28/2015 Last visit: 11/14/2024 Posts: 10604 Rating: (825)	Hello, this looks like that PLC is on another subnet, maybe has another IP. Therefore system must create another IP, but it's failed. hmmmm like you don't have Admin rights???? Don't understand... This is set in instalation that system can add this.
	With best regards... Ivan Duris Flight: OMICO
Suggestion To thank Quote Answer

1/29/2016 9:13 AM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/14/2024 Posts: 22452 Rating: (3029)	Hello, which IP Suite you have exactly on the PC for the networkadapter you select? IP? SubnetMask? Gateway? If you have a direct connection between the PLC and the PC then you should not configure any router or Gateway address! only IP and Subnet. Regards Christoph

Suggestion To thank Quote Answer

1/30/2016 7:29 AM	Rate (0)
grrrrrroooo Platinum Member Joined: 3/16/2015 Last visit: 10/10/2021 Posts: 1250 Rating: (173)	i vuongvuong1234 Dear all! Picture attached is message error but i don't know remove error. PLC: 1214 AC/DC/Relay. Ver FW: 4.1. TIA V13 SP1 If i use another computer, i can download and reset factory. But if i use my computer, i can't online and download! Help me! Thank you! I was able to recreate all of the errors you posted except the one in this post. All of the other ones had to do with IP range, Subnet or router, One of them was due to windows defender but this one I spent literally hours and have no clue what causes it : "Failed to establish connection with the device with address 192.168.0.1. An additional project-specific IP address is required" I don't know what that mean. But just to cover all the bases, turn off the firewall, anti-virus and windows defender. What windows version are you using? Do you have anything else connected to the PCI card or is it just on port?
	Last edited by: Kal.A at: 1/30/2016 7:30:37 AM Last edited by: Kal.A at: 1/30/2016 7:31:43 AM Last edited by: Kal.A at: 1/30/2016 8:07:32 AM
Suggestion To thank Quote Answer

7/5/2016 8:15 AM	Rate (0)
s.q.g Posts: 1 Rating: (0)	Hello, Try this: Firt, set IP adress PLC 192.168.0.X and IP adress PC 192.168.0.Y Second, IP adress PLC[192.168.0.X] and found accessible device[192.168.0.X] must be the same Third, if step 1 and 2 doesnt work reinstall PG/PC interface driver[Intel(R) Ethernet Connection I218-LM]...this last usually work Regards!!
s.q.g Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

9/16/2016 11:39 AM	Rate (0)
aldoussnows Posts: 1 Rating: (0)	Once upon a time I also reported this chyba.PLC not in Run. Button in Stop
aldoussnows Posts: 1 Rating: (0)	Last edited by: aldoussnows at: 9/16/2016 11:40:35 AM
Suggestion To thank Quote Answer

8/6/2017 5:53 PM	Rate (1)
Casemiro14 Posts: 4 Rating: (1)	I had the same problem and this is how I solved it. I went to accessible devices and searched for any accessible device. With the IP address that was found, I configured the IP address of the port to the same IP address (See Picture1). Once that was done, I configure the IP address of the PC within the range. (See Picture2). Then, go Online, and search for any compatible devices and you should be able to connect!!! Hope this helped!!! Attachment Picture.PNG (3551 Downloads)
Casemiro14 Posts: 4 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users Jen_Moderator 0_Einstein PLCJosh AutoGen_7381050

8/3/2018 7:19 AM	Rate (0)
ram r Posts: 7 Rating: (0)	i am tryed you procedure but still its same.
ram r Posts: 7 Rating: (0)
Suggestion To thank Quote Answer

8/3/2018 7:27 AM	Rate (0)
Jay. Posts: 1283 Rating: (105)	Please post more details about your problem and your Software, IP settings and PG/PC interface setting so that someone can help you. Just saying tried same procedure will not get any help for you. Thanks, Jay ram r i am tryed you procedure but still its same.
Jay. Posts: 1283 Rating: (105)
Suggestion To thank Quote Answer

Result pages:: |; 1 | 2 | 3 | 4 | 5 |...; |

55 Entries

Entries per page: 10 | 20 | 50 | all

|

Share this page:

Share this page on...

Related topics by keywords:

Communication General

Follow us on