Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Connection problem to OZW772... v 2.0 with ACS Tool

Created by: AutoGen_8470841 at: 3/29/2023 9:06 AM (5 Replies)

Rating (0)

Thanks 4

6 Entries

3/29/2023 9:06 AM	Rate (0)
AutoGen_8470841 Posts: 1 Rating: (0)	Hi. when I try to connect to OZW772... v 2.0 using the ACS Tool I get the error "Unknown Unicom error". Access via ACS is enable, port 50005 is open.
AutoGen_8470841 Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

10/11/2023 9:35 AM	Rate (0)
AutoGen_2729717 Member Joined: 5/4/2022 Last visit: 11/14/2024 Posts: 1 Rating: (0)	Hi, did you find a soulution for your issue? Just recieved a similiar error with ACS.

Suggestion To thank Quote Answer

10/18/2023 11:23 AM	Rate (0)
@AutoGen_1061457 Posts: 1 Rating: (0)	I had the same problem. Unknown unicom error (30) One way to solve the problem is to reboot the OZW772 (unplug the power) But on distance thats not possible, then you can update the firmware, the OZW772 wil also reboot. Even with the same firmware.
@AutoGen_1061457 Posts: 1 Rating: (0)	Last edited by: Jen_Moderator at: 10/19/2023 07:29:02 Text formatting optimized.
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Jen_Moderator AutoGen_3556129

4/4/2024 10:38 AM	Rate (0)
AutoGen_4420243 Member Joined: 4/12/2018 Last visit: 8/9/2024 Posts: 2 Rating: (0)	You can restart the OZW webserver without updating in the Faults -> Services -> Restart web server menu

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users azimut @AutoGen_1061457

12/5/2024 2:16 PM	Rate (0)
AutoGen_3556129 Joined: 6/24/2019 Last visit: 12/5/2024 Posts: 1 Rating: (0)	Buongiorno, anche io ho questo problema su un solo impianto "errore unicom 30" quando provo a connettermi con acs all 'impianto per apportare modifiche Come dovrei procedere?

Suggestion To thank Quote Answer

12/5/2024 2:34 PM	Rate (0)
Moderator_Lan Moderator Joined: 7/30/2024 Last visit: 12/5/2024 Posts: 415 Rating: (8)	Hello AutoGen_3556129, Please try to discuss your question in English language. This is an international community and we try to focus on one language. Posting in English will help to generate more replies to your question. This is the translation of your post: AutoGen_3556129 Good morning, I also have this problem on only one system "unicom error 30" when I try to connect with acs to the system to make changes How should I proceed? Kind regards, Moderator_Lan

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on