Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Corrupted Application file

Created by: sh_sh at: 8/13/2009 8:45 AM (7 Replies)

Rating (0)

Thanks 0

8 Entries

8/13/2009 8:45 AM	Rate (0)
sh_sh Posts: 20 Rating: (0)	Hi, How can I repair a winCC flexible application file.I can not open my application since last time that my laptop is powered off (low battery) and the WinCC flexible program is not responding. Please help me. Sh_Sh
sh_sh Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

8/13/2009 10:08 AM	Rate (0)
IBN-Service Posts: 8946 Rating: (994)	sh_sh Hi, How can I repair a winCC flexible application file.I can not open my application since last time that my laptop is powered off (low battery) and the WinCC flexible program is not responding. Please help me. Sh_Sh May be the problem is not the project but WCCflexible. Have you try to Reset / Repair WCCflexible? Have you tried an other project?
IBN-Service Posts: 8946 Rating: (994)
Suggestion To thank Quote Answer

8/13/2009 10:24 AM	Rate (0)
sh_sh Posts: 20 Rating: (0)	I have reset (hmies.exe -reset) winCC flexible . I can open other projects but not my project. What is repair? Sh-Sh
sh_sh Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

8/13/2009 10:58 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 3/2/2023 Posts: 10221 Rating: (1175)	Hello, Perhaps using Windows method with "Restore System" would be helpful. Regards, Hristo Mihalev

Suggestion To thank Quote Answer

8/13/2009 11:46 AM	Rate (0)
Jeebs Posts: 218 Rating: (28)	Hi, First make a back up from the WinCC files. Just in case. Now remove all project files except for the .hmi file. Run the .hmi file. If this doesn't work,I'm afraid the project is broken. hope this helps Jeebs
Jeebs Posts: 218 Rating: (28)
Suggestion To thank Quote Answer

8/13/2009 12:22 PM	Rate (0)
Arunakat1 Posts: 217 Rating: (52)	Hello, Well I also face the same situation few months ago I couldn’t open projects (any) also I couldn’t uninstall wincc flex but with another login (windows) to the computer I had succeed of uninstalling wincc and the reinstall it again after that every thing went fine. As IBN mentioned try to reinstall or repair you wincc installation with your wincc flex software (DVD). Best regards.
Arunakat1 Posts: 217 Rating: (52)
Suggestion To thank Quote Answer

8/13/2009 1:09 PM	Rate (0)
IBN-Service Posts: 8946 Rating: (994)	sh_sh I have reset (hmies.exe -reset) winCC flexible . I can open other projects but not my project. What is repair? Sh-Sh Some time ago, I have had a similar problem with WinCCflexible 2005. I send the broken project files to the Simatic - Customer Support. After a short time, they send the projectback to me, and it was workin again fine, without any data lost.
IBN-Service Posts: 8946 Rating: (994)
Suggestion To thank Quote Answer

9/22/2009 5:05 AM	Rate (0)
ceos Posts: 3 Rating: (0)	Delete all temporal files in your home directory asociated to WinCC Flexible under "Program data". The "Program data" folder is hidden. Regards
ceos Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on