Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

CU310-2 PN

Created by: alex.zelenyanszki at: 9/15/2017 10:03 AM (7 Replies)

Rating (2)

Thanks 0

8 Entries

9/15/2017 10:03 AM	Rate (0)
alex.zelenyanszki Member Joined: 1/4/2017 Last visit: 9/14/2022 Posts: 5 Rating: (0)	Hello ! I have a little problem with CU310-2 PN, I can`t find this device on Tia Portal v14 device list, and i try to find a support package which include this device but i didn`t find it :( Maybe somebody can help me which one helps mo to connect it to directly Thanks a lot Alex

Suggestion To thank Quote Answer

9/15/2017 10:38 AM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/30/2023 Posts: 21753 Rating: (2901)	Hello, not available! The CU310-2 is a S120 System and not supported in TIA , you must use STARTER to configure this Drive Family. In TIA you can use the GSDML/GSD file for the configuration of communication telegramms between drive and PLC but the configuration of the drive is not possible. Regards Christoph

Suggestion To thank Quote Answer

9/16/2017 10:17 AM	Rate (0)
alex.zelenyanszki Member Joined: 1/4/2017 Last visit: 9/14/2022 Posts: 5 Rating: (0)	Hi! Thank you for the fast reply, I have already tried,with STARTER but, it is hard to connect via ethernet cable, maybe I need to try to convert serial to USB maybe it will working, than i jsut need to find the rigth USB port in the school. Maybe you have any other suggest, becouse thats all I have found in the Manual, and it would like to use the wizzard to add this device but hard to find it :/. Thnak you Alex

Suggestion To thank Quote Answer

9/17/2017 3:23 PM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/30/2023 Posts: 21753 Rating: (2901)	Hello, connect with ethernet is very easy. Connect thePC duirectly to X127 and use the device IP range 169.254.11.x. Or connect the PC to X150 and set you own IP and connect. USB to serial is not need! Regards Christoph

Suggestion To thank Quote Answer

9/29/2017 11:53 AM	Rate (0)
alex.zelenyanszki Member Joined: 1/4/2017 Last visit: 9/14/2022 Posts: 5 Rating: (0)	Hello! Now i have a little complex problem :/ I can connect to the CPU, but now something is wrong. When i see the accessible devices i see the Drive, and i can add it to work place but when i would like to go online there is something wrong. I have attached a picture Thanks for any help. BR Alex Attachment Online.png (129 Downloads)

Suggestion To thank Quote Answer

9/29/2017 12:21 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/30/2023 Posts: 21753 Rating: (2901)	Hi, which Version online and which version offline have the CU? is there any other SIEMENS SW online if you try to connect? Regards Christoph

Suggestion To thank Quote Answer

9/29/2017 1:48 PM	Rate (0)
alex.zelenyanszki Member Joined: 1/4/2017 Last visit: 9/14/2022 Posts: 5 Rating: (0)	Hello, Now i have fixed it the problem is with the another Ethernet cable i need to unplug it and than it is working, and no problem, now i just need to set some sensors and the home position, i hope it will be working now. Thank you, I hope there is no more question BR Alex

Suggestion To thank Quote Answer

12/18/2017 8:12 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 9/29/2023 Posts: 7350 Rating: (145)	New question published by alex.zelenyanszki is split to a separate thread with the subject Reaction time of sensors are pretty slow . Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_S

Follow us on