Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Download by starter

Created by: Pranab at: 6/2/2011 7:59 PM (3 Replies)

Rating (0)

Thanks 0

4 Entries

6/2/2011 7:59 PM	Rate (0)
Pranab Posts: 63 Rating: (1)	Dear expert, In my project, there are 7 nos. Sinamics DCM drive. I have set their node address 21,22, 24, 25, 26 and 27. I have done parameter settings of node address 21 via starter (By CP5512) and upload and save this project. I want to download the setted save project to another 6 nos. drive. I have open save project and set node address 22 (previously set 21) in P918 in off line mode and then done save and compile. After that try to communicate with DCM via starter but can not communicate or on line not happen. I am try to download in this way but unable. So what is procedure for downloading from backup different node address project. Pl help. Regards Pranab
Pranab Posts: 63 Rating: (1)
Suggestion To thank Quote Answer

6/3/2011 2:00 AM	Rate (0)
Graeme Platinum Member Joined: 6/4/2008 Last visit: 11/12/2024 Posts: 1505 Rating: (325)	Don't forget to change the following address to access a different DCM: See attached pdf file. Regards, Graeme Attachment DC_Address.pdf (692 Downloads)

Suggestion To thank Quote Answer

6/3/2011 5:54 AM	Rate (0)
Pranab Posts: 63 Rating: (1)	Graeme Don't forget to change the following address to access a different DCM: See attached pdf file. Regards, Graeme Dear Expert, You told the address setting in SIMOTION SCOUT software. But I am using Starter software and this address setting is not available. Regards Pranab Attachment communication.GIF (612 Downloads)
Pranab Posts: 63 Rating: (1)
Suggestion To thank Quote Answer

6/3/2011 7:36 AM	Rate (0)
pfuser Silver Member Joined: 9/18/2006 Last visit: 11/14/2024 Posts: 593 Rating: (64)	Hi. Can reset the factory setting. Then change the address at 22. Or try connecting to an address of 21 and replace the address in the online. Best regards. P.S.I have not worked with DCM. CU320 is a DIP-switches set the address

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_DCM

Follow us on