Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

DVA_S5 and IM308C

Created by: Import-User-1 at: 8/29/2005 3:41 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

8/29/2005 3:41 PM	Rate (0)
Import-User-1 Posts: 3609 Rating: (29)	We have a CPU928 with an IM308C which has lost its EPROM. There are 3 Simoverts connected to the IM308C. From the S5 program, we know that DVA_S5 function blocks were used. However, we do not know how to set up the IM308C EPROM for these Simoverts (regarding I/O address fields in COM Profibus software) although we know the slave numbers of each Simovert. Please advise where we can get hold of such a DVA_S5 user manual? Best regards, Kk.
Import-User-1 Posts: 3609 Rating: (29)
Suggestion To thank Quote Answer

8/29/2005 3:41 PM	Rate (0)
Import-User-2 Silver Member Joined: 8/10/2005 Last visit: 4/9/2024 Posts: 1486 Rating: (32)	After studying, I need: E20125-C0002-S302-A2-7600 manual and 6DD1800-0SW0 software

Suggestion To thank Quote Answer

8/29/2005 3:41 PM	Rate (0)
Import-User-2 Silver Member Joined: 8/10/2005 Last visit: 4/9/2024 Posts: 1486 Rating: (32)	Dear Sir, you must order the DVA_S5 software 6DD1800-0SW0 via your Siemens-contact; then manual is included. Note: Your issue is handled directly from our customer-support in Bejing. SR 1-101062306 adsupport.asia@siemens.com

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on