Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Dynisco pressure sensor to PLC AI

Created by: AutoGen_2870474 at: 2/11/2024 7:43 PM (3 Replies)

Rating (0)

Thanks 1

4 Entries

2/11/2024 7:43 PM	Rate (0)
AutoGen_2870474 Joined: 4/20/2023 Last visit: 12/4/2024 Posts: 33 Rating: (0)	Hello, I hope this message finds you well. I have a sensor from Dynisco(MDA460). It is a pressure sensor which measures from 0 to 500 bar. Input of 10Vdc and output of 33.3mv. I wanted to connect to an analog input of my plc (0-10v, 4-20mA or 0 to 20mA) for pressure reading. However, I have no idea how to convert the output signal(33.3 mV) to the desired range. I really appreciate it if anyone could help me. Best Regards.

Suggestion To thank Quote Answer

2/11/2024 8:26 PM	Rate (0)
ixo65 Grandmaster Joined: 12/18/2014 Last visit: 12/20/2024 Posts: 34442 Rating: (4294)	Which PLC?

Suggestion To thank Quote Answer

2/13/2024 9:27 AM	Rate (0)
AutoGen_2870474 Joined: 4/20/2023 Last visit: 12/4/2024 Posts: 33 Rating: (0)	1215 DC/DC/DC

Suggestion To thank Quote Answer

2/13/2024 9:51 AM	Rate (0)
Mr.V Silver Member Joined: 6/19/2019 Last visit: 12/17/2024 Posts: 706 Rating: (77)	I think you need signal converter from mV to 0-10V or 4-20mA, I foun in Google like this one 0-30mV to 0-10V signal converter link HERE

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users qwazee

|

Share this page:

Share this page on...

Follow us on