Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Error $190011: value could not be written to the PLC during simulating PLC/HMI

Created by: ASTECH at: 9/27/2013 1:47 PM (37 Replies)

Rating (5)

Thanks 14

Result pages:: |; 1 | 2 | 3 | 4; |

38 Entries

Entries per page: 10 | 20 | all

9/27/2013 1:47 PM	Rate (0)
ASTECH Posts: 45 Rating: (0)	Dear all, Today I wanted to create some PLC / HMI project using TIA Portal V12 SP1 (Step7 Professional V12 SP1 , WinCC Professional V12 SP1 and PLCSIM V12 SP1). I can, after starting the simulation (PLCSIM) download the PLC HW and software and it runs. I can see the blocks / networks online and even modify the data (for instance state ofmerkers from 0 to 1). It seems to be working OK. I can also run the simulation of the HMI project , screens work OK, like jump from one screen to another ( using the button that activates scren ). Butwhen I try to influence my PLC data from myHMI , for instance by using the button that sets the merker bit in thePLC, then I get every timeError "$190011: value could not be written to the PLC". Itried all the things I know, rebuild hardware, software blocks, saved, downloaded again, and still cannot solve this isue. I think that the Connection settingsare OK, like Devices & Networks, seem to be fine. Inthe "old, traditional"Step 7 V5.5 SP3 withWinCC flex 2008 SP3 when I test projects I use simulator PLCSIM, download the project, run the HMI Runtime and it always works. No special things required or neded. My V12 SP1 project contains of CPU1511-1PN and10''PN Color panel.I tested it also in environment V12 without SP1, the same problem. Are there any additional settings or thing I have to do or set in? Please help.
ASTECH Posts: 45 Rating: (0)
Suggestion To thank Quote Answer

9/30/2013 12:54 PM	Rate (1)
K!ke Posts: 1299 Rating: (136)	Hello, you can find this in manual: https://www.automation.siemens.com/mdm/default.aspx?DocVersionId=39281800203&Language=en-US&TopicId=32139243787 Did youcheck your PG/PC-Interface in Control Panel? K!ke
K!ke Posts: 1299 Rating: (136)
Suggestion To thank Quote Answer

10/2/2013 1:54 PM	Rate (0)
ASTECH Posts: 45 Rating: (0)	Hallo K!ke, In de manual that you recommend I cannot find any extra steps to follow, those you can find there I knew already. What should I check in the PG/PC interface? When I simulate the project, my interface is PLCSIM 5.x ( for 300/400PLC ) and PLCSIM V12( for 1500PLC). So I chose PLCSIM V12 as my interface, simulation of the PLC works fine, so as the Runtime Simulation of the screen. They only do not work together ( value could not be written to the PLC ).
ASTECH Posts: 45 Rating: (0)
Suggestion To thank Quote Answer

10/2/2013 7:22 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 12/18/2024 Posts: 1567 Rating: (170)	Explain a little more. What bit are you using? It is a bit of a byte? Which event of the button you're using? If you can put a picture of the error.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

10/3/2013 12:06 PM	Rate (0)
ASTECH Posts: 45 Rating: (0)	Dear Ricardo, What kind of explanation would you like to get from me? It is the most simple test program that I can imagine: - A button in the HMI sets the bit M10.0 when pressed, - when this bit is high, M10.1 becomes also high (one ladder PLC code line) - and the yellow figure on the HMI becomes visible if this M10.1 is high. I am using event: Press --> SetBit M10.0and Release --> ResetBit M10.0 Iknow that with Step7 V5.5 and WinCC flex 2008 I should not have any errors even if the code would be not good or HMI project not OK. It has to do with some interface / communication settings or something similar. The error text I have listed in my first pos, but anyway I attached all the screenshots you ask for: HMI , PLC and the error in one ZIP file. Attachment HMI PLC Error.zip (1384 Downloads)
ASTECH Posts: 45 Rating: (0)
Suggestion To thank Quote Answer

10/3/2013 1:06 PM	Rate (0)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/20/2024 Posts: 8786 Rating: (1172)	Hello, Can you explain the connection between CPU and HMI? How is the access point called? (It should be S7online) Very important: What are settings PG/PC interface? (S7online -> PLCSIM S7-1200/S7-1500) Please check. Best regards, Wizard

Suggestion To thank Quote Answer

10/3/2013 1:29 PM	Rate (0)
rdoliveira Gold Expert Joined: 4/26/2012 Last visit: 12/18/2024 Posts: 1567 Rating: (170)	ASTECH Dear Ricardo, What kind of explanation would you like to get from me? It is the most simple test program that I can imagine: - A button in the HMI sets the bit M10.0 when pressed, - when this bit is high, M10.1 becomes also high (one ladder PLC code line) - and the yellow figure on the HMI becomes visible if this M10.1 is high. I am using event: Press --> SetBit M10.0and Release --> ResetBit M10.0 Iknow that with Step7 V5.5 and WinCC flex 2008 I should not have any errors even if the code would be not good or HMI project not OK. It has to do with some interface / communication settings or something similar. The error text I have listed in my first pos, but anyway I attached all the screenshots you ask for: HMI , PLC and the error in one ZIP file. M10.0 and M10.1 puts in a field, to see that value appears. 0 appears, or appears #.
	"Always make a backup before and check the best time before testing." Obrigado.
Suggestion To thank Quote Answer

10/4/2013 11:53 AM	Rate (0)
ASTECH Posts: 45 Rating: (0)	Hoi Ricardo, I see ##### when I will read out some PLC data. Definitely there isno connection...
ASTECH Posts: 45 Rating: (0)
Suggestion To thank Quote Answer

10/4/2013 12:12 PM	Rate (0)
ASTECH Posts: 45 Rating: (0)	Wizard Hello, Can you explain the connection between CPU and HMI? How is the access point called? (It should be S7online) Very important: What are settings PG/PC interface? (S7online -> PLCSIM S7-1200/S7-1500) Please check. Best regards, Wizard Wizard, The connection in HMI--> Connections is S7 Connection at the side of the HMI, the side of the PLC (access password) is notfilled in. But what o you mean with settings of PC/PG interface? Where can I find them? When I make connection I only then can make a choice (see the screenshot). I use PLCSIM S7-1200/S7-1500 , becauseI want to simulate 1500PLC. Are there any other settings that could be the problem? Attachment PG PC Interface.jpg (2786 Downloads)
ASTECH Posts: 45 Rating: (0)
Suggestion To thank Quote Answer

10/4/2013 12:24 PM	Rate (2)
Wizard Diamond Expert Joined: 4/24/2006 Last visit: 12/20/2024 Posts: 8786 Rating: (1172)	Hello ASTECH, Go to control panel of PC. There should be "Setting PG/PC interface" There you should choose S7Online -> PLCSim S7-1200/S7-1500 Best regards, Wizard

Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users ASTECH pman AutoGen_3890934 AutoGen_8562789

Result pages:: |; 1 | 2 | 3 | 4; |

38 Entries

Entries per page: 10 | 20 | all

|

Share this page:

Share this page on...

Related topics by keywords:

TIA WinCC Communication

Follow us on