Exchange several digital information between LOGO!

ixo65

Here the programs for the master / master mode.

The LOGO! 0BA7 unfortunately can send network outputs only to a slave, not to another master.
If you want to sent a digital information from master to master, you must establish a connection between the two masters. One master is the server, the other master is the client. The VM area is used for data exchange.

In your program is now only 1 bit sent from one master to the other master, there is still with the solution I made with the block B075 (master 1, the server).

If you want later to get more bits between the LOGO!s, then we have to go for another solution.

------------------------------------------------------------------------------------------
Split from Logo in slave mode : pushbutton switch malfunction .

ixo65

In attachment an example.

Thank you for your time, and for modifying my program. 
thanks for your 15-bit example, 
but I do not see how I can apply it to my program ... 
i don't see how to match it with my client program
I will try to understand how it works

ixo65

I have integrated my UDF blocks into your program (server).

Nice thanks.

What I wanted to know is how can I know on which port of the block connect for example I6 so that it controls Q2 (and I5 --> Q3, I1 --> Q15, etc... for example) on Master_2 ?

After I leave you, promised ;)

ixo65

 

Gouda1234

 After I leave you, promised ;)

Why? My Support not good?

In attachment an exaple for testing and learning.

NICE, I guess I understood,

Sonner I didn't understood that, that is written in blue means : I1 : 21 . 0, I had to write in the Master 2 NI1 (VB : 21, bit :0) to match.

And that works, thanks a lot !!!

PS : But i don't understand when in mapping configuration, the adress is 20, that it works also with I1 : 21 . x but it doesn't matter it works !!