Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Failure connection ID:16#0

Created by: Buzz LightYear at: 4/16/2009 4:46 AM (3 Replies)

Rating (1)

Thanks 0

4 Entries

4/16/2009 4:46 AM	Rate (0)
Buzz LightYear Experienced Member Joined: 5/25/2007 Last visit: 12/11/2024 Posts: 83 Rating: (3)	Hello: Imade a project that 400H plc connect32 s7-300 plcs by iso-on-tcp connection,and the alarm appears like the attachment,Failure connection ID:16#0,but I didn't configured the connection of ID:16#0,what do I watch out of this? Attachment 20090401_alm.JPG (370 Downloads)

Suggestion To thank Quote Answer

4/16/2009 5:13 AM	Rate (1)
Phantom75 Posts: 2661 Rating: (279)	Hi Buzz, Did you see the following FAQ? What does the PCS7 process control message "Failure Connection ID: 16#0" indicate and how can it be avoided? Regards
Phantom75 Posts: 2661 Rating: (279)
Suggestion To thank Quote Answer

4/16/2009 5:53 AM	Rate (0)
Buzz LightYear Experienced Member Joined: 5/25/2007 Last visit: 12/11/2024 Posts: 83 Rating: (3)	Dear Phantom75: Thans for your help,I know what the problem is. Best Regards Buzz LightYear

Suggestion To thank Quote Answer

6/27/2024 7:37 PM	Rate (0)
ElchinAZ Joined: 10/21/2022 Last visit: 12/25/2024 Posts: 4 Rating: (0)	Buzz LightYear Dear Phantom75: Thans for your help,I know what the problem is. Best Regards Buzz LightYear Hi mate, Could you please share your findings? :) Failure connection ID:16#??

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on