Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Grinding wheel diameter compensation after sharpening

Created by: Bora at: 4/22/2008 1:10 AM (4 Replies)

Rating (0)

Thanks 0

5 Entries

4/22/2008 1:10 AM	Rate (0)
Bora Posts: 13 Rating: (0)	Hi.One of my friends use a shaft grinding machine with 840D control.After automatic sharpening the grinding wheel , diameter decreases but there is no effect to tool offset.I tried to search about wheel compensation , found texts about $DPG1 to $DPG9 specification parameters and online tool monitoring but ı am not sure theese will work. Please help.
Bora Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/23/2008 8:59 AM	Rate (0)
Sanjoy 4m India Posts: 55 Rating: (2)	I think you are finding for automatic offset update after every wheel dressing cycle. 840D system have the facility , but let me know -whether the machine have measuring guage / probe or not ? please revert back --- Regards,
Sanjoy 4m India Posts: 55 Rating: (2)
Suggestion To thank Quote Answer

4/23/2008 2:51 PM	Rate (0)
Bora Posts: 13 Rating: (0)	Dear sanjoy, Thanks for your reply. The parameters that I wrote, worked.There is no probes on machine.I have reserved R parameters for wheel diameter and axis motions.That solved the problem. Thanks.
Bora Posts: 13 Rating: (0)
Suggestion To thank Quote Answer

4/24/2008 12:08 PM	Rate (0)
Sanjoy 4m India Posts: 55 Rating: (2)	Great man - thanks.
Sanjoy 4m India Posts: 55 Rating: (2)
Suggestion To thank Quote Answer

6/6/2008 2:50 PM	Rate (0)
vki Posts: 63 Rating: (3)	can ugive sample format / mpf? rgds vki
vki Posts: 63 Rating: (3)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on