Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how C-axis can be configured in sinamics DCM drive to integrate with cnc sinumerik control system 840 c controller

Created by: Sallo at: 7/4/2013 2:39 PM (1 Replies)

Rating (0)

Thanks 0

2 Entries

7/4/2013 2:39 PM	Rate (0)
Sallo Posts: 8 Rating: (0)	Hi Experts, I am working on Sinamics DCM drive which is required to be integrate with CNC Machine having Sinumerik Control system with 840 C Controller. Existing drive is Simo Drive. I have achieved the following targets 1. Turning mode application is achieved where itused as a spindle 2. Milling Mode application not achieve where it is used as a C-axis. Problem in Milling Mode: When we set 45 degree. The spindle rotate only 4 degree in milling mode and controller showing following problems 1044-C speed setpoint value warning limit responded 1564-Cspeed set value alarm limit responded Further howC-axis can be configured in sinamics DCM drive
Sallo Posts: 8 Rating: (0)
Suggestion To thank

7/5/2013 10:23 AM	Rate (0)
CS Moderator Moderator Joined: 9/1/2005 Last visit: 11/6/2024 Posts: 4109 Rating: (195)	closed cause question posted more than once. Please discusse this question within the thread how C-axis can be configured in sinamics DCM drive to integrate with sinumerik control system 840 c controller. This thread is published within the conference SINUMERIK CNC automation systems Best regards CS Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards CS Moderator
Suggestion To thank

|

Share this page:

Share this page on...

Related topics by keywords:

SINAMICS_DCM

Follow us on