Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how can access an example project with two Siwarex modules?

Created by: Radiin at: 3/28/2023 3:30 PM (1 Replies)

Rating (1)

Thanks 0

2 Entries

3/28/2023 3:30 PM	Rate (0)
Radiin Member Joined: 3/3/2018 Last visit: 12/6/2023 Posts: 1 Rating: (0)	Hello and best regards. I have a PLC s7-1200-1214 dc/dc/rly with two Siwarex modules,wp231. how can I access an example project with two Siwarex modules. Thanks & best regards ------------------------------------------------------------------------------------------ Split from Can connect 3 siwarex wp231 modules with a single PLC s71200 1214c?.
	Last edited by: Jen_Moderator at: 03/29/2023 09:50:22 New subject after splitting
Suggestion To thank Quote Answer

3/29/2023 8:44 AM	Rate (1)
Siwarexi Gold Expert Joined: 1/4/2007 Last visit: 11/21/2023 Posts: 1071 Rating: (165)	Hello Radiin, Unfortunately, there exist no example project for two Siwarex WP231 modules. You have to use the existing example project for one Siwarex WP231 module, and extend the S7-program by yourself. But this is not so complicated. You only have to do: 1. Insert once again for the second WP231 the FB231 via Drag and Drop into the OB1. 2. You are asked to create a new Instance-DB. Confirm with OK. 3. At the new FB231 calling in the OB1: Set the correct start-address from the second WP231 module at the parameter „ADDR“ (= start address from the WP231 module in the Device configuration). 4. Use the new Instance-DB to communicate with the second WP231 module. 5. Extend the OB35 for the second WP231 module. Best regards Siwarexi

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on