Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to change MD to MW

Created by: ni1 at: 4/22/2011 10:36 AM (8 Replies)

Rating (0)

Thanks 2

9 Entries

4/22/2011 10:36 AM	Rate (0)
ni1 Posts: 50 Rating: (0)	Dear All, I want to change MW to MD in Simatic Manager. If anyone know, please advise me. Thank&Best regards, ni
ni1 Posts: 50 Rating: (0)
Suggestion To thank Quote Answer

4/22/2011 10:59 AM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	You can use the converterblocks, see picture. Best regards Marcjan Attachment converter.JPG (522 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

4/22/2011 11:07 AM	Rate (0)
ni1 Posts: 50 Rating: (0)	Dear Marcjan, Thanks. But I do not know which converter block can be used? Please advise me , which block can be use. I have already tried the converter blocks.But I cannot directly change from MD to MD. I do not know how to change. Thanks. Best Regards, ni
ni1 Posts: 50 Rating: (0)
Suggestion To thank Quote Answer

4/22/2011 11:37 AM	Rate (0)
Marcjan Platinum Expert Joined: 4/22/2010 Last visit: 11/18/2024 Posts: 5697 Rating: (715)	What is it exactly you want to do ? integer to real or double integer ? Tell me more please.
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer

4/22/2011 5:08 PM	Rate (0)
ni1 Posts: 50 Rating: (0)	Hello, I want to change FC105 scale output MD to MW. Thanks. Best regards, ni
ni1 Posts: 50 Rating: (0)
Suggestion To thank Quote Answer

4/26/2011 10:56 AM	Rate (0)
Chilly_Garfield Posts: 316 Rating: (37)	Hi ni1, when you write the data in, e.g.MD10 you can make an access on MW10 or MW12. --> Then you have the responsed data type!
Chilly_Garfield Posts: 316 Rating: (37)
Suggestion To thank Quote Answer

4/26/2011 11:24 AM	Rate (0)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 10/26/2024 Posts: 6852 Rating: (1365)	ni1 I want to change FC105 scale output MD to MW. Check the following codes, [code] CALL "SCALE" IN :=IW100 HI_LIM :=1.000000e+002 LO_LIM :=0.000000e+000 BIPOLAR:=FALSE RET_VAL:=MW100 OUT :=MD104 //if out abs (out) value less than 32767.0 //This is ensured by high and low scale values L MD 104 RND T MW 108[/code] Hope to be helpful regards
	Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Chilly_Garfield Sama1986

4/26/2011 11:51 AM	Rate (0)
UMENCHO Diamond Member Joined: 3/21/2006 Last visit: 11/1/2024 Posts: 10229 Rating: (1181)	change double integer to integer in ladder program

Suggestion To thank Quote Answer

4/26/2011 5:49 PM	Rate (0)
ni1 Posts: 50 Rating: (0)	Dear all, thank for your advise. best regards, ni
ni1 Posts: 50 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on