Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

how to creat alarm in 840d

Created by: mgopal at: 8/7/2010 4:09 AM (4 Replies)

Rating (2)

Thanks 1

5 Entries

8/7/2010 4:09 AM	Rate (1)
mgopal Posts: 18 Rating: (1)	sir any one can explain how to creat alarm in 840d siemens
mgopal Posts: 18 Rating: (1)
Suggestion To thank Quote Answer

8/7/2010 6:05 AM	Rate (1)
Ekalavya Posts: 2964 Rating: (476)	Hello..... 840D is with PCU 50 / PCU 20? any way attaching you the both the steps check it out..... Regards, Ekalavya Attachment Alarm creation in PCU50-PCU20.pdf (1485 Downloads)
Ekalavya Posts: 2964 Rating: (476)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Service77

9/12/2010 1:50 PM	Rate (0)
mehar Posts: 91 Rating: (1)	hello, i too facing same problem in 840D sl with hmi sl software. we follow procedure in docon but its not working fine. any other documentation which will help or please send a (CF card -->OEM --> HMI -->ING) "ing" folder backup
mehar Posts: 91 Rating: (1)
Suggestion To thank Quote Answer

9/14/2010 7:27 AM	Rate (0)
RAM81 Silver Member Joined: 3/3/2008 Last visit: 10/5/2023 Posts: 333 Rating: (51)	hi do follow the below path Alarm txt: card/oem/sinumerik/hmi/lng/create a new directory using winscp with name "eng"/alpu.txt with regards ram

Suggestion To thank Quote Answer

8/13/2014 4:22 AM	Rate (0)
uvcontrols Posts: 4 Rating: (0)	Normally you may find the file with your 700xxx (plc user alarms) you have to be in windows mode on your PCU50 so you can use the windows explorer in F:.\OEM\LANGUAJE\ALPU_UK.COM actually the name may vary like ALHMI_UK.COM once you are digging on F..\OEM\LANGUAJE\ you may search with the "Search for files and folders" tool from windows something like *ALUK.COM* this will display all the configuration files that have something to do with alarms for wider search you may go to your windows explorer and start the search on F: directlly. once you get your results right click one by one and say open with notepad, so you may be able to actually read the contents. when you open the right one you will know because the alarms will start with 700xxx now you have to relate your 700xxx with your DB2 on the plc the easiest way is search for any of good luck
uvcontrols Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on