Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

I CAN'T DOWNLOAD THE PROJECT

Created by: AzJonni at: 3/1/2023 9:42 AM (7 Replies)

Rating (1)

Thanks 0

8 Entries

3/1/2023 9:42 AM	Rate (0)
AzJonni Member Joined: 7/24/2018 Last visit: 5/4/2023 Posts: 4 Rating: (0)	Hello. I'm trying to download a project to the CPU555 (6DD1600-0BB0), but the download option is greyed out. There is a memory card. Initial loading to a CPU did. Attachment Безымянный.png (76 Downloads)

Suggestion To thank Quote Answer

3/1/2023 10:46 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 6/1/2023 Posts: 2181 Rating: (272)	Hello. Do you have correct selection in Set PG/PC Interface? Is it possible to establish online connection to the station?

Suggestion To thank Quote Answer

3/1/2023 12:30 PM	Rate (0)
AzJonni Member Joined: 7/24/2018 Last visit: 5/4/2023 Posts: 4 Rating: (0)	Accessible Nodes - sees PLC also pings the IP address Attachment Accessible Nodes.png (72 Downloads)

Suggestion To thank Quote Answer

3/2/2023 4:16 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 6/1/2023 Posts: 2181 Rating: (272)	Hello. Could you download the program from CFC-menu 'CPU-Download'?

Suggestion To thank Quote Answer

3/2/2023 5:43 AM	Rate (0)
AzJonni Member Joined: 7/24/2018 Last visit: 5/4/2023 Posts: 4 Rating: (0)	Hello. Compilation succeeds in CFC, download gives error 33:16656 "Online: Connection could not be established. The connection partner is not responding" I think the problem is in the network settings. But I can't do anything about it.(((
	Last edited by: AzJonni at: 03/02/2023 05:44:40
Suggestion To thank Quote Answer

3/2/2023 5:46 AM	Rate (0)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 6/1/2023 Posts: 2181 Rating: (272)	Is it the first time you try to load the program into CPU?

Suggestion To thank Quote Answer

3/2/2023 9:11 AM	Rate (0)
AzJonni Member Joined: 7/24/2018 Last visit: 5/4/2023 Posts: 4 Rating: (0)	Yes. Сpu new.

Suggestion To thank Quote Answer

3/2/2023 10:34 AM	Rate (1)
KSN Platinum Expert Joined: 8/25/2006 Last visit: 6/1/2023 Posts: 2181 Rating: (272)	Set in HWConfig the IP address of CPU in the same subnet as IP of your PC, then From manual: Follow these steps to set the IP address of a CPU555 or CP50M1: 1. Set the module to user stop state "d" or initialization error "0". 2. Connect the module online. 3. In the SIMATIC Manager, open the dialog under Target system > Edit Ethernet Node... 4. Click "Browse" under "Nodes accessible online". 5. Select the appropriate MAC address. 6. Enter the appropriate IP address and subnet mask. 7. Click "Assign IP configuration". CFC projects can now be loaded after successful transfer.

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on