Navigation

Installation of STEP 7 V13 SP1 on same PC with STEP 7 V5.5

Created by: fiah at: 2/1/2017 8:11 AM (1 Replies)

2/1/2017 8:11 AM	Rate (0)
fiah Posts: 59 Rating: (0)	Can I install Simatic Step 7 V13 SP1 and simatic wincc professional v13 SP1 at the same PC where Simatic Step 7 V5.5 with its PLCSIM has already been installed? Or I will have to install at a different Laptop PC? Please advise. ------------------------------------------------------------------------------------------ Split from Automation softwares upgrade.
fiah Posts: 59 Rating: (0)	Last edited by: Min_Moderator at: 2/1/2017 4:19:52 PM New subject after splitting
Suggestion To thank Quote Answer

2/1/2017 8:15 AM	Rate (2)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 9/22/2023 Posts: 21744 Rating: (2901)	Hello, you can install it on the same System, no problem if you have only installed Step7 V5.x (with PLCSIM). If you have WinCC V6.x/V7.x installed then you cant install WinCC Prfessionsl V13 SP1 on the System. Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users fiah Gabriel_Rosendy