Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

IOT2050 will not boot from SD Card

Created by: AutoGen_3380040 at: 10/25/2023 11:04 AM (2 Replies)

Rating (0)

Thanks 2

3 Entries

10/25/2023 11:04 AM	Rate (0)
AutoGen_3380040 Member Joined: 5/4/2021 Last visit: 11/7/2023 Posts: 2 Rating: (0)	Hi. After deleting the eMMC the IOT2050 will not boot from mmC0. While the boot I set the boot sequence to mmC0, but the IOT do not start. Attached the boot debug. Thanks for your support in advance. Best regards Thomas Attachment bootlog.txt (338 Downloads)

Suggestion To thank Quote Answer

10/30/2023 12:46 PM	Rate (0)
bergmanu Platinum Member Joined: 4/28/2015 Last visit: 11/5/2024 Posts: 3345 Rating: (379)	Hi, for a solution please see here. Best regards!
	Not working for IOT2050 support anymore from March 1st, 2024. I really enjoyed the time supporting you! :)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_3380040

11/6/2023 2:09 PM	Rate (0)
AutoGen_3380040 Member Joined: 5/4/2021 Last visit: 11/7/2023 Posts: 2 Rating: (0)	Hi. After booting the IOT 2050 with Example Image 1.0.2 I could change the Build_ID and then I updated the FW to V1.3.1. WIth the new Firmware I could start the IOT2050 with example Image V1.3.1 Thanks bergmanu for the support. Kind regards

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users bergmanu

|

Share this page:

Share this page on...

Follow us on