Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

"loading will not be performed because preconditions are not met"

Created by: Hamdi.M at: 12/14/2018 2:34 PM (23 Replies)

Rating (7)

Thanks 6

Result pages:: |; 1 | 2 | 3; |

24 Entries

Entries per page: 10 | 20 | all

10/30/2019 11:39 AM	Rate (0)
enciniyır25 Posts: 8 Rating: (0)	hey Jay hi, ı am taking as a error. appear of screen is on the below. please can you help me ? Attachment Adsız.png (930 Downloads)
enciniyır25 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

10/30/2019 11:42 AM	Rate (0)
enciniyır25 Posts: 8 Rating: (0)	hi reza, please can you help me ? ı have same problem.
enciniyır25 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

10/30/2019 1:02 PM	Rate (0)
Jay. Posts: 1283 Rating: (105)	But cannot see any error. Can you compile your project first and see what error you have in your program?
Jay. Posts: 1283 Rating: (105)
Suggestion To thank Quote Answer

10/30/2019 2:44 PM	Rate (0)
enciniyır25 Posts: 8 Rating: (0)	i don't know error or not. but i am taking this error while download to plcsim. compiling isn't problem.my project is although simple. not connection with plcsim. i can send you video while compiling?? Attachment Adsız.png (648 Downloads)
enciniyır25 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

10/30/2019 9:28 PM	Rate (0)
enciniyır25 Posts: 8 Rating: (0)	please will you help me?
enciniyır25 Posts: 8 Rating: (0)
Suggestion To thank Quote Answer

10/31/2019 3:55 AM	Rate (0)
Jay. Posts: 1283 Rating: (105)	Did you install PLCSIM properly? Already selected proper PG/PC interface for PLCSIM? In some cases PLCSIM can't start automatically when you click simulation. SO you need to start PLCSIM manually and then try to load your config. It should work. Also like you said you can do a video of all the config you are doing and post in youtube and share the link here if it is easy. Check the below link as well. maybe you will get an idea. plcsim
Jay. Posts: 1283 Rating: (105)	Last edited by: Jen_Moderator at: 10/31/2019 08:07:15 Optimized link.
Suggestion To thank Quote Answer

10/31/2019 1:08 PM	Rate (0)
enciniyır25 Posts: 8 Rating: (0)	hi jay, I looked your link. I tried cpu 1516 pn/dp.when start simulation, plcsim opened auotomatically. but result again not changed.my youtube video link is below. please can you check? I tried many cpu however result always in this way. https://www.youtube.com/watch?v=Q1QKIHoqdV8
enciniyır25 Posts: 8 Rating: (0)	Last edited by: Jen_Moderator at: 10/31/2019 13:28:27 Embedded video.
Suggestion To thank Quote Answer

10/31/2019 1:50 PM	Rate (0)
Jay. Posts: 1283 Rating: (105)	Hardware software rebuild, plcsim online and run mode before downloading. You have the latest update for the softwares?
Jay. Posts: 1283 Rating: (105)
Suggestion To thank Quote Answer

10/31/2019 2:00 PM	Rate (0)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/11/2024 Posts: 22445 Rating: (3029)	hello, which PLC is exactly in the project? Which MLFB(Order Number) and which FW Version? Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users stylesclash_ajay

11/1/2019 12:02 PM	Rate (0)
enciniyır25 Posts: 8 Rating: (0)	no I haven't latest update for the softwares? I am downlading latest for the softwares of plcsim.but it is showing on the below while uppgrade. (note: there is nothing working in the task manager) Attachment Adsız.png (480 Downloads)
enciniyır25 Posts: 8 Rating: (0)	Last edited by: enciniyır25 at: 11/01/2019 12:05:39
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on