Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

"loading will not be performed because preconditions are not met"

Created by: Hamdi.M at: 12/14/2018 2:34 PM (23 Replies)

Rating (7)

Thanks 6

Result pages:: |; 1 | 2 | 3; |

24 Entries

Entries per page: 10 | 20 | all

12/14/2018 2:34 PM	Rate (1)
Hamdi.M Member Joined: 12/14/2018 Last visit: 7/4/2022 Posts: 1 Rating: (1)	"loading will not be performed because preconditions are not met" this appers to me when I am downloading the software to plc 1200 useinf TIA Portal v13 sp1 update9 ------------------------------------------------------------------------------------------ Split from 1214C: problem with loading. Attachment ERROR.PNG (2076 Downloads)
	Last edited by: Jen_Moderator at: 12/17/2018 7:09:51 AM New subject after splitting
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users cooooo

12/14/2018 4:57 PM	Rate (1)
HugoD Posts: 439 Rating: (109)	hamooodiii "loading will not be performed because preconditions are not met" this appers to me when I am downloading the software to plc 1200 useinf TIA Portal v13 sp1 update9 Hello hamooodiii, You should open a new post, else it is really hard to follow. This is not related to a software issue, but to a compilation error in your program. You should show us the section "Info" ... "Compile". Best regards, HugoD
HugoD Posts: 439 Rating: (109)
Suggestion To thank Quote Answer

4/15/2019 9:08 AM	Rate (0)
Reza110 Posts: 4 Rating: (0)	Hi I have the same problem. When I compile my program, everything is OK however when I download it, this page appears. Thanks for any comment, I am very new to PLC programming. Bests Reza HugoD hamooodiii "loading will not be performed because preconditions are not met" this appers to me when I am downloading the software to plc 1200 useinf TIA Portal v13 sp1 update9 Hello hamooodiii, You should open a new post, else it is really hard to follow. This is not related to a software issue, but to a compilation error in your program. You should show us the section "Info" ... "Compile". Best regards, HugoD Attachment 15-04-2019-Download Error.jpg (1075 Downloads)
Reza110 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

4/15/2019 3:42 PM	Rate (1)
0_Einstein Diamond Expert Joined: 7/7/2010 Last visit: 11/8/2024 Posts: 15388 Rating: (2443)	You need to read the compiler errors and fix them all before anything can get downloaded to the PLC.
	science guy
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Reza110

4/15/2019 4:07 PM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/7/2024 Posts: 22439 Rating: (3029)	Reza110 Hi I have the same problem. When I compile my program, everything is OK however when I download it, this page appears. Thanks for any comment, I am very new to PLC programming. Bests Reza HugoD hamooodiii "loading will not be performed because preconditions are not met" this appers to me when I am downloading the software to plc 1200 useinf TIA Portal v13 sp1 update9 Hello hamooodiii, You should open a new post, else it is really hard to follow. This is not related to a software issue, but to a compilation error in your program. You should show us the section "Info" ... "Compile". Best regards, HugoD Hello, please check if during compile the Messagefilter for error is active. Is it not the the compile report no error! This filter can be found in the windows with the compiler message output, here the red cross must be active! Regards Christoph

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users AutoGen_9479788

4/16/2019 9:05 AM	Rate (0)
Reza110 Posts: 4 Rating: (0)	Thanks ChristophD The Messagefilter for error was active! During compile, there is no error (Above) However when downloading, there is error! (Below) Any Idea?! Bests Reza Attachment 16-04-2019-1&2.jpg (1337 Downloads)
Reza110 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

4/16/2019 9:10 AM	Rate (1)
ChristophD Grandmaster-Expert Joined: 5/12/2006 Last visit: 11/7/2024 Posts: 22439 Rating: (3029)	Hello, you see the error in the screen. Is in the PLC Data Types , please check this. Regards Christoph

Suggestion To thank Quote Answer

4/16/2019 9:17 AM	Rate (1)
Jay. Posts: 1283 Rating: (105)	The problem is that you were not compiling the whole software sections, just individual block. click on the PLC and then right click, goto compile and then compile software all, then you will find what exactly the error is. When you try to download, the compilation happens for the whole software sections automatically and reads the error. Reza110 Thanks ChristophD The Messagefilter for error was active! During compile, there is no error (Above) However when downloading, there is error! (Below) Any Idea?! Bests Reza
Jay. Posts: 1283 Rating: (105)
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users JMowrey Kahl

4/16/2019 10:41 AM	Rate (0)
Reza110 Posts: 4 Rating: (0)	Hey Jay Thanks, It was the point! It works now! Bests Reza
Reza110 Posts: 4 Rating: (0)
Suggestion To thank Quote Answer

4/16/2019 10:48 AM	Rate (1)
Jay. Posts: 1283 Rating: (105)	It was the same Christoph mentioned. He was guiding you to look at the error he already seen in your download compilation column, but you seem couldn't undertsnad what he really meant. we both said the same thing. I just guided you for the way to compile. Christoph guided you towards the error.
Jay. Posts: 1283 Rating: (105)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on