Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

master drives mc

Created by: daya at: 10/12/2007 1:17 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

10/12/2007 1:17 PM	Rate (0)
daya Posts: 11 Rating: (0)	master drives mc 15 kw drive not starting ,on display showing o010 and after sometime display 009 mode, please help urgent
daya Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

10/12/2007 2:40 PM	Rate (0)
Poljachina Posts: 62 Rating: (0)	How are you controling the drive, via profibus??? Terminal strip maybe? Please give more info about your problem. However if the drive shows you 010 (Precharging of DC link bus), and then 009(ReadyON) you are close to makeing the motor move. If you are controling the drive via profibus, you just need to release the inverter. Look in the control word wich bit you have to set to 1. If I recall corectly it's the 4th bit... Best regards
Poljachina Posts: 62 Rating: (0)
Suggestion To thank Quote Answer

10/12/2007 2:46 PM	Rate (0)
daya Posts: 11 Rating: (0)	hello, we are having motion control drives,with common rectifier , in that one of the drive showing ready 009 but when starting command given 010 showing display . please hellp urgent
daya Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

10/12/2007 3:33 PM	Rate (0)
daya Posts: 11 Rating: (0)	thank you oljachina Yes the master drive motion control drive controlling via profibus and terminal strip, i am clear about control bit,where i have to check how to solve this problem 010 regards
daya Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

10/12/2007 3:37 PM	Rate (0)
daya Posts: 11 Rating: (0)	yes the drive controlling with profibus, how to release the inverter and where i have to check the control bit,which parameter? Best regards
daya Posts: 11 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on