Measuring Input Configure to TM DIDO16x24v

Dear Christoph Expert & All,

I known you are expert about Simotion control. I hope you can help me solve my big issue.

My project use PLC S7 1511T-1 PN & TM module for Measuring Input TO (Detect mark on paper).

I really follow step by step  the configure TO measuring input with TM module. But i always got Error Configure. i attached picture about the steps i did the configure TO measuring input with TM. Please advice me what i can check for issue. Hope You can help me much!

Much appreciated your advice! 

Hello,

this is not the right section since it is not Simotion-related... It is a PLC related question.

You have Error 113 and consequent reaction 8. Did you check manuals for what that 113 means ?

Davinator

Hello,

this is not the right section since it is not Simotion-related... It is a PLC related question.

You have Error 113 and consequent reaction 8. Did you check manuals for what that 113 means ?

 Thanks, because my Project use MC_Measuring Input for control S210 Syn Axis. i check Error 113. This alarm text "Isochronous mode not possible". But i  dont know what to solve this alarm.

Hope you meet this issue before

Dear all,

i solved this issue by change Source of send clock into Isochronous mode. last used "Local Send Clock". Now fixed by use " use send clock of Profinet interface [X1]

Thank All!

ChristophD

This mean you have not configured a isochronous bus system which is nead or the MC Measuroing

check you profinet and network configuration that you hace configure IRT with SyncMaster and SyncSlave

regards

Christoph

 Thank you very much! ChristophD