Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

MICROMASTER 440 displays alarm A0501

Created by: buuuzek at: 11/22/2011 1:48 PM (2 Replies)

Rating (1)

Thanks 1

3 Entries

11/22/2011 1:48 PM	Rate (0)
buuuzek Posts: 1 Rating: (0)	Hello, This is my first post I have the problem from MICROMASTER 440. before everything was ok MICROMASTER displays alarm A0501 per second. I done: - swapping MICROMASTER - NOK - swapping of braking resistor - NOK - I checked the cables PROFIBUS -NOK - I checked the brake rectifier SEW Eurodrivemotoreduktor -NOK What else can we check? please help me
buuuzek Posts: 1 Rating: (0)
Suggestion To thank Quote Answer

11/22/2011 2:30 PM	Rate (0)
Marcjan Platinum Member Joined: 4/22/2010 Last visit: 10/17/2024 Posts: 5697 Rating: (715)	Hello, Attached part of the manual related to Alarm 501 with some more things to check. Regards, Marcjan Attachment A0501.pdf (1810 Downloads)
	Problem solved? Please let us know! Please no technical questions by PM, use the forum sections for your questions.
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users 135001

11/29/2011 8:33 PM	Rate (1)
Vithani Platinum Expert Joined: 7/8/2009 Last visit: 8/5/2024 Posts: 1976 Rating: (477)	A501 means your Load is too much that it reaches overload Limit Value The best way is, check output cable and Motor with meger, and then if everything is OK, try to run Motor on NO Load and see if you still getting Alarm. If not, then you are having problem in Load side regards Devesh Vithani
	I dont Like people driving Fast, thats the reason I overtake them ;)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on