Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Migrated HMI MP377, led of BF flashing

Created by: AutoGen_1109938 at: 12/21/2022 2:41 PM (2 Replies)

Rating (0)

Thanks 0

3 Entries

12/21/2022 2:41 PM	Rate (0)
AutoGen_1109938 Joined: 12/21/2022 Last visit: 10/29/2024 Posts: 1 Rating: (0)	Dear, we have outdated HMI MP377 connected to profibus with s7 300 so migrated to new HMI TP 1200 but the BF led flashes all the time and the green Run led is ok and there are exchanges between s7 300 and the new HMI (change of variable). Can you help please? Thank you.

Suggestion To thank Quote Answer

12/21/2022 2:55 PM	Rate (0)
Duris_I Diamond Expert Joined: 4/28/2015 Last visit: 10/30/2024 Posts: 10585 Rating: (825)	Hello, PB network cfg, PB cable correct functionality, PB devices addressing, PB specification same, HMI internal cfg set properly (here you need go to internal cfg and set all correctly), HMI prj correct cfg as is internally set and downloaded to HMI. Then you can maybe set some data exchange with PLC due negotiated TAGs, memory.
	With best regards... Ivan Duris Flight: OMICO
Suggestion To thank Quote Answer

12/21/2022 5:36 PM	Rate (0)
Online Tech Platinum Member Joined: 3/28/2015 Last visit: 11/7/2024 Posts: 721 Rating: (213)	Hello, Perform online connection with the CPU and check the Diagnostic Buffer.
	Eng.Mohamed Ibrahim WhatsApp : +201122880543
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on