My iot2050 advanced FS01 does not boot example image 1.1.1

I have an IOT2050 6ES7 647-0BA00-1YA2 FS:01, with firmware 1.0.0, I had previously tried with the example image v1.0.2, I loaded it with the win32 disk imager, it worked correctly. I recently tried (on the same micro SD and another) to install the example image 1.1.1 (which I understand is also compatible with the same firmware version), following the same installation procedure on the micro SD, then I insert the micro SD in the iot2050, I connect its Ethernet cable to port I tested with other micro SDs, I tested the two Ethernet ports by sending a ping to 192.168.200.1, I also tested with DHCP and so far I have not achieved anything.

Tengo un IOT2050 6ES7 647-0BA00-1YA2 FS:01, con firmware 1.0.0, anteriormente había probado con la imagen de ejemplo v1.0.2, la carga con el win32 disk imager, funcionó correctamente. Hace poco intenté (en la misma micro SD y en otra) instalar la imagen de ejemplo 1.1.1 (que tengo entendido también es compatible con la misma versión de firmware), siguiendo el mismo procedimiento de instalación en la micro SD, después introduzco la micro SD en el iot2050, le conecto su cable Ethernet en el puerto X1P1, prendo el iot2050, pero la luz de STAT se mantiene fija, no parpadea y tampoco me responde ping al 192.168.200.1. Hice pruebas con otras micro SD, probé los dos puertos Ethernet mandando ping al 192.168.200.1, también hice pruebas con DHCP y hasta ahorita no he logrado nada.

ixo65

English please ...

I have an IOT2050 6ES7 647-0BA00-1YA2 FS:01, with firmware 1.0.0, I had previously tried with the example image v1.0.2, I loaded it with the win32 disk imager, it worked correctly. I recently tried (on the same micro SD and another) to install the example image 1.1.1 (which I understand is also compatible with the same firmware version), following the same installation procedure on the micro SD, then I insert the micro SD in the iot2050, I connect its Ethernet cable to port I tested with other micro SDs, I tested the two Ethernet ports by sending a ping to 192.168.200.1, I also tested with DHCP and so far I have not achieved anything.