nControll with 611U

RAM81

hi
try this one whether its the same you are having?

regards
ram

IBN-Service

RAM81

hi
try this one whether its the same you are having?

regards
ram

Thanks,
but I have this example (it is from the Toolbox) already.

Thats not realy what I am looking for.

Hi.

This is an example not of toolbox.
However, this is an example nContr with Sinamics S120 rather than Simodrive 611U. From the same controller as with the Sinamics S120, and with the Simodrive 611U. (FB83 -> FB283)
I have an example with only 611U posContr. If necessary, I'll show you.

Best regards.

pfuser

...However, this is an example nContr with Sinamics S120 rather than Simodrive 611U. From the same controller as with the Sinamics S120, and with the Simodrive 611U. (FB83 -> FB283)...

IBN-Service

pfuser

...However, this is an example nContr with Sinamics S120 rather than Simodrive 611U. From the same controller as with the Sinamics S120, and with the Simodrive 611U. (FB83 -> FB283)...

Thank you, dear friend.

But this project is language locked,
would you please save again in universal language?

Please have a look here:

http://support.automation.siemens.com/WW/view/en/22635866

Hi.

I also sometimes have to open other people's projects - Removed global / languare.*

Best regards.

UMENCHO

Hello pfuser,

In oder to open it properly can you explain which of bellow mentioned software packages need to be installed on PC:

1.PDM

2.Protool

3.WinCC FLex

4. Starter

Are all of them used?

UMENCHO

One more thing - can you attach an english translation of each FC's comments and symbolic name?

Best regards,

Hristo Mihalev

Hi.

I think yes. Just what you need from a program specifically. I do not see any reason to transfer hydraulic, lubrication, etc.

Best regards.