Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Not able to configure 1FT7 series motor with Sinumeric 840D

Created by: Jitendra Jadhav at: 1/30/2009 6:37 AM (3 Replies)

Rating (0)

Thanks 0

4 Entries

1/30/2009 6:37 AM	Rate (0)
Jitendra Jadhav Posts: 5 Rating: (0)	How to configure 1FT7044-xAFxx-xMxx type servo motor with Sinumeric 840D? This type number (1FT7 series) is not available in the motor list. My HMI version is 07.03. Please give me solution urgently.
Jitendra Jadhav Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

1/31/2009 6:54 PM	Rate (0)
Pee Ell Sea Posts: 672 Rating: (57)	Hi, If there is no data available in the HMI then you must contact the hotline for the data and enter each value by hand. It doesn't take very long.
Pee Ell Sea Posts: 672 Rating: (57)
Suggestion To thank Quote Answer

1/31/2009 8:19 PM	Rate (0)
Gebhardt Karl Platinum Expert Joined: 7/16/2006 Last visit: 1/2/2024 Posts: 1502 Rating: (176)	You can Update to Aktual HMI-Version.
	Karl
Suggestion To thank Quote Answer

5/5/2009 1:16 PM	Rate (0)
Guru Posts: 5 Rating: (0)	Also you can do a dummy config with SimocomU; Go to expert List you will get the required parameter values.
Guru Posts: 5 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on