Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

open project error

Created by: oldfalg at: 4/1/2008 10:07 AM (15 Replies)

Rating (3)

Thanks 5

Result pages:: |; 1 | 2; |

16 Entries

Entries per page: 10 | all

4/1/2008 10:07 AM	Rate (1)
oldfalg Posts: 28 Rating: (1)	when I open a project ,there is an error information.256:145.there are project . thanks. I use step7 v 5.4 sp3. Attachment niaoyu.zip (983 Downloads)
oldfalg Posts: 28 Rating: (1)	Last edited by: oldfalg at: 4/1/2008 10:08 AM
Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users WWW.NIRTECH.COM Priew_Eng

4/1/2008 11:01 AM	Rate (0)
Sydney Gold Member Joined: 1/4/2008 Last visit: 9/26/2024 Posts: 703 Rating: (96)	Hello, this message means that your project was corrupted by changing ofsome data from another then Siemens engineering tools. I'm not sure if it could be repaired...

Suggestion To thank Quote Answer

4/2/2008 3:15 AM	Rate (0)
oldfalg Posts: 28 Rating: (1)	Thanks
oldfalg Posts: 28 Rating: (1)
Suggestion To thank Quote Answer

4/3/2008 8:55 AM	Rate (0)
automatinglego Posts: 14 Rating: (0)	hi i have the same problem.Please Help.
automatinglego Posts: 14 Rating: (0)
Suggestion To thank Quote Answer

6/3/2008 9:28 AM	Rate (0)
Michael-SH Regular Member Joined: 8/30/2006 Last visit: 9/27/2024 Posts: 26 Rating: (0)	Hi, I have had the same problem in the last days. The Hotline was not able to help but I saved my project in this way: 1. I startet WinCC flexible to open the embedded OP in the crashed project and saved this as a stand alone HMI project. 2. I created a new Step7 project 3. Exit Step7 manager 4. With the windows explorer I put a copy of all sub directories (not the files in the root of the project directory !) out off the crashed project into the new project directory 5. After that i was happy to see all my lost procedures in the new created project. 6. In my case there were still no symbols, so I created an empty symbol table in the new project and placed a copy of the symbol table files from the crashed project into the new project (Dir = YDBs\xxxx\Symlist.*). After that I was happy with all the symbols back! 7. Now I started WinCC flex. and integrated the saved HMI project into my new Step7 project. After that I reactivated the PLC-OP connection. 8. I saved the project with reorganisation and with a new name and made a SAFTY COPY !!! I can not promise that this way will work in your case! Make a try with a copy of your crashed project and give a reply if your are lucky or not. greetings from Germany Michael
	Last edited by: Michael-SH at: 6/4/2008 9:37 AM
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users AutoGen_7269852 OMKRIS2017 gusali

1/1/2012 8:58 PM	Rate (0)
ciwa79 Experienced Member Joined: 1/27/2009 Last visit: 10/18/2024 Posts: 42 Rating: (1)	hi michael, I have same problem but your solution not work for me, any another solution?? regards, Ciwa

Suggestion To thank Quote Answer

1/18/2012 2:11 PM	Rate (2)
Cicero Gold Member Joined: 10/10/2005 Last visit: 10/18/2024 Posts: 1921 Rating: (136)	Hello, error messages in kind of this case could be solved, when you reorganize your project. Open in the SIMATIC Manager the dialog "File > Save As..." Activate the function "With reorganization (slow). Change the name of the project. Klick of OK. The STEP 7 project will be new saved and reorganised. With best regards Cicero

Suggestion To thank Quote Answer

5/27/2013 2:27 PM	Rate (0)
S7-Tio Advanced Member Joined: 5/27/2013 Last visit: 8/12/2024 Posts: 22 Rating: (1)	Something that helped for me. You're going to need an old or previously project (of the same you lost). - Retrieve de ZIP file or restore the old/previously project to a different Windows Folder. - Copy the files from the corrupted project into the old/previously project folder. - Open the old/previously project with SIMATIC Manager and save as... You should have your blocks/functions/dbs from your current corrupted project on the old/previously version of it. Worked perfectly for me.

Suggestion To thank Quote Answer

5/27/2013 2:29 PM	Rate (0)
S7-Tio Advanced Member Joined: 5/27/2013 Last visit: 8/12/2024 Posts: 22 Rating: (1)	Cicero Hello, error messages in kind of this case could be solved, when you reorganize your project. Open in the SIMATIC Manager the dialog "File > Save As..." Activate the function "With reorganization (slow). Change the name of the project. Klick of OK. The STEP 7 project will be new saved and reorganised. With best regards Cicero The problem is that we couldn't open the project, therefore we couldn't Save As... Tried direct to Reorganize (File -> Reorganize), but didn't work for me.

Suggestion To thank Quote Answer

8/23/2014 10:59 AM	Rate (0)
Sonet_008 Posts: 3 Rating: (0)	S7-Tio Cicero Hello, error messages in kind of this case could be solved, when you reorganize your project. Open in the SIMATIC Manager the dialog "File > Save As..." Activate the function "With reorganization (slow). Change the name of the project. Klick of OK. The STEP 7 project will be new saved and reorganised. With best regards Cicero The problem is that we couldn't open the project, therefore we couldn't Save As... Tried direct to Reorganize (File -> Reorganize), but didn't work for me. same happened with me. what is the solution
Sonet_008 Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on