Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Overview about FS states of IOT2050

Created by: bergmanu at: 12/15/2021 9:43 AM (9 Replies)

Rating (2)

Thanks 7

10 Entries

12/15/2021 9:43 AM	Rate (1)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 6/7/2023 Posts: 3190 Rating: (365)	Hi, since we had a few changes regarding the pre-installed software I want to give you an overview about the different versions of the two IOT2050 devices. The FS (functional state) indicates in which "status" the device is delivered. IOT2050 Basic (6ES7647-0BA00-0YA2): FS:01 = First hardware version (PG1) FS:02 = Second harware version (PG2) FS:04 = Hardware redesign - no functional change to FS:02 (PG2) FS:02/04 require Example Image V1.2.1/V1.2.2 The FS:03 had a small redesign as well, but as far as I know this was never delivered due to material shortage. IOT2050 Advanced (6ES7647-0BA00-1YA2): FS:01 = Delivered without pre-installed Industrial OS (empty eMMc) FS:02 = Delivered with pre-installed Industrial OS on eMMC. Default boot device: eMMc FS:03 = Delivered with pre-installed Industrial OS on eMMC. Default boot device: SD Card FS:04 = Second harware version (PG2) without pre-installed Industrial OS (empty eMMc) FS:05 = Hardware redesign - no functional change to FS:04 (PG2) (still empty eMMc) FS:04/05 requires Example Image V1.2.1/V1.2.2 or Industrial OS V3.2.2 I will update this list whenever we release new FS versions. Currently delivered FS are in written in italic style. Best regards!
	Last edited by: bergmanu at: 12/15/2021 09:46:51 Last edited by: bergmanu at: 01/14/2022 08:37:23 added FS:02 of IOT2050 Basic Last edited by: bergmanu at: 01/14/2022 08:37:32 Last edited by: bergmanu at: 01/14/2022 08:37:52 typos Last edited by: bergmanu at: 02/01/2022 17:10:36 add FS:04 of IOT2050 Advanced Last edited by: bergmanu at: 04/05/2022 07:44:29 Last edited by: bergmanu at: 11/08/2022 07:00:29 Last edited by: bergmanu at: 11/08/2022 07:07:09 added new Basic / Advanced FS Last edited by: bergmanu at: 01/04/2023 09:37:47
Suggestion To thank Quote Answer
This contribution was helpful to 4 thankful Users Jen_Moderator HelmutM AutoGen_452482 mm76

2/4/2022 5:05 AM	Rate (0)
Arkom P Advanced Member Joined: 3/2/2017 Last visit: 5/28/2023 Posts: 21 Rating: (1)	Why do you need to make things too complicated like this?

Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Davidgugo

2/10/2022 7:57 AM	Rate (1)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 6/7/2023 Posts: 3190 Rating: (365)	Hi, for the IOT2050 Basic it's very simple. FS:01 for the first release of the CPU; FS:02 for the second release of the CPU with improvements. The IOT2050 Advanced has some more FS, because of the internal eMMc and the pre-installed Industrial OS. The complicated thing is, that the R&Ds of the IOT2050 (incl. Example Image) and the R&D of the Industrial OS are independent and not really synchronized. Let me explain the different FS: FS:01 : The Industrial OS was not available / ready when we were about the release the IOT2050. We didn't want to wait some more months, so the decision to release the device with empty eMMc was made FS:02 : The Industrial OS was ready and released, so we did pre-install it on the devices, as this was the plan from the beginning. FS:03 : There were lots of eglible complaints, because eMMc was first boot device, so each and every customer was in need to go through the first setup, even when he didn't want to use the Industrial OS, but the Example Image on SD or eMMc instead. So we decided to change the default boot order to have SD card as first boot device FS:04 : Same story as FS:01, but with second release of the CPU future FS:05 : I think you can image this functional state. The IndOs will come pre-installed again. I am also not happy with this, but decisions are not made by me :) Best regards!

Suggestion To thank Quote Answer
This contribution was helpful to 2 thankful Users Arkom P U_813ea376-7e4f-4...

4/5/2022 5:18 AM	Rate (0)
Zahinator Member Joined: 7/4/2019 Last visit: 2/25/2023 Posts: 4 Rating: (0)	Greetings, Sifu Bergmanu. Glad to hear about the newer hardware version. Will this PG2 solve the internal component of overheating temperature? If it does, will be any product recall for the purchased PG1? Regards,

Suggestion To thank Quote Answer

4/5/2022 7:45 AM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 6/7/2023 Posts: 3190 Rating: (365)	Hi, yes, this heating issue of the device is solved with the new hardware version. There is no recall of the "old" devices, as the heating issue is not affecting the functionality of the device. It was tested and released under these conditions. Best regards!

Suggestion To thank Quote Answer

11/7/2022 2:45 PM	Rate (0)
Venomz Experienced Member Joined: 4/25/2018 Last visit: 6/7/2023 Posts: 70 Rating: (7)	Hi! Today I received an FS:05 IOT2050 Advanced, could you please add description about this particular FS? Edit: Thought this FS:05 might be with pre-installed industrial OS but seems like there still is no pre-installed as the IOT2050 red stat led lit up on first boot.
	Last edited by: Venomz at: 11/07/2022 15:14:10
Suggestion To thank Quote Answer

11/7/2022 3:34 PM	Rate (0)
Hidle Joined: 11/7/2022 Last visit: 1/2/2023 Posts: 1 Rating: (0)	Same issue here, received 14x FS:05 devices, does not seem to come with preinstalled OS. Would appreciate an update on this as soon as possible

Suggestion To thank Quote Answer

11/8/2022 7:02 AM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 6/7/2023 Posts: 3190 Rating: (365)	Hi, sorry for that. I updated the entry now. FS:04 (Basic) and FS:05 (Advanced) are small hardware redesigns to the prior versions, there is no functional difference. The eMMc is of the FS:05 (Advanced) is still empty as there is still no IndOS V3.x available.... Best regards!
	Last edited by: bergmanu at: 11/08/2022 07:07:28
Suggestion To thank Quote Answer

1/10/2023 8:37 AM	Rate (0)
NADHIR Member Joined: 7/5/2022 Last visit: 6/5/2023 Posts: 5 Rating: (0)	Hi, Same issue here , I have recieved the SIMATIC IOT2050 (6ES7647-0BA00-1YA2 advanced) with FS:05 , after installing the industrial os v3.2.2 , the device could not boot from eMMC and stat led is red , and the overheating problem persists Best regards!

Suggestion To thank Quote Answer

1/10/2023 2:44 PM	Rate (0)
bergmanu Platinum Expert Joined: 4/28/2015 Last visit: 6/7/2023 Posts: 3190 Rating: (365)	Hi, what did you do exactly? Installing the Indsutrial OS (via booting from Service Stick) worked, but the following reboot resulted in a red STAT LED? Best regards!

Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Related topics by keywords:

Follow us on