Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PB SOFTNET-DP and C#

Created by: Anders at: 8/7/2007 1:20 PM (4 Replies)

Rating (0)

Thanks 0

5 Entries

8/7/2007 1:20 PM	Rate (0)
Anders Posts: 20 Rating: (0)	Hello! I wonder if anyone have a used C# (or VB.NET)to communicate with the OPC server using PB SOFTNET-DP? I would really appreciate a sample application! // Anders
Anders Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

8/7/2007 2:46 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello Anders, would you tell us which version of SIMATIC NET you use? If you have Edition 2006 you should have already some samples on the Installation. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

8/7/2007 3:34 PM	Rate (0)
Anders Posts: 20 Rating: (0)	Hello J_Bell Thanks for your answer! I have 2005. Do I need to upgrade to 2006 to work from C# or is it just the samples? (A friend has 2006 so I could get the samples from him) // Anders
Anders Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

8/7/2007 3:42 PM	Rate (0)
J_Bell Posts: 5822 Rating: (412)	Hello, I guess you need the wrapper... but do not ask me, I have not worked with C# yet. I hope you can get the Samples at least. Best regards J_Bell
J_Bell Posts: 5822 Rating: (412)
Suggestion To thank Quote Answer

8/8/2007 11:19 AM	Rate (0)
Anders Posts: 20 Rating: (0)	Hello J_Bell, The C# sample from 2006 worked even when I use .NET 2.0. Had to make some minor changes but it was noted in the sample how to make them. The dotnet wrapper did exist already in 2005 so I could use them! Thank you very much for answering! // Anders
Anders Posts: 20 Rating: (0)
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on