PLC S7 1200 Upload

To upload the complete device to your project, follow these steps:

1. Select the project name in the project tree.

   The "Upload device to PG/PC" command in the "Online" menu is then enabled.

2. In the "Online" menu, select the "Upload device to PG/PC" command.

   The "Upload device to PG/PC" dialog opens.

3. Select the type of interface you want to use for the load operation in the "Type of the PG/PC interface" drop-down list.
4. Select the interface to be used from the "PG/PC interface" drop-down list.
5. Click the "Configure interface" button to the right of the "PG/PC interface" drop-down list to adapt the settings for the selected interface.

   See also: Establishing and canceling an online connection

6. In the accessible devices table, select the device from which you want to upload project data.
7. Click on "Load".

   Depending on the selected device, a dialog appears in which you have to enter additional information, such as the position of the module rack.

   The project data of the device is uploaded to the project. You can edit it offline and then download it to the device again.

Or:

1. Open the accessible devices in the project tree.

   See also: Displaying accessible devices

2. Use a drag-and-drop operation in the project tree to move the accessible devices to the project.

   Depending on the selected device, a dialog appears in which you have to enter additional information, such as the position of the module rack.

   The project data of the device is uploaded to the project. You can edit it offline and then download it to the device again.

Regards,

Marcjan

Hi,

If the program in the PLC is in TIA PORTAL v10 and you try to upload with TIA PORTAL v11 or greater...

It's possible too??

I can only :  make hardware as a CPU from which I want upload,   set IP which IP CPU ,  go to online , and all different bloks upload to PG.

May be have different way upload? Ask me?