Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

PLCsim to Simulink connection

Created by: ARN2011 at: 7/4/2012 8:52 AM (7 Replies)

Rating (2)

Thanks 1

8 Entries

7/4/2012 8:52 AM	Rate (0)
ARN2011 Advanced Member Joined: 7/16/2011 Last visit: 4/10/2023 Posts: 24 Rating: (0)	I want to connect PLCsim to Simulink. Simulink toolbox support OPC communication but i dont know how PLCsim can communicate over OPC protcole? I want to know if any intermediate software is available to do this? I have tried Nettoplcsim-S7o-v-0-9-1 to produce avirtual PLC on the network but it didn't work either. Generally is there any OPC server that is capable to connect PLCsim?

Suggestion To thank Quote Answer

7/4/2012 11:57 AM	Rate (0)
Cicero Gold Member Joined: 10/10/2005 Last visit: 6/15/2023 Posts: 1909 Rating: (132)	Hello, PLCSIM is a simulation tool for STEP 7 V5.x, STEP 7 Professional 2010 and for STEP 7 Professional V11. I do not believe wheter PLCSIM is released for Simulink. But I recommend to ask the "The MathWorks" company in this regards With best regards Cicero

Suggestion To thank Quote Answer

7/4/2012 4:35 PM	Rate (0)
ARN2011 Advanced Member Joined: 7/16/2011 Last visit: 4/10/2023 Posts: 24 Rating: (0)	Hi Dear Cicero, By more searching on web during last houres I have found thatPLCsim can communicatethoughS7ProSimby COM objects withan OPC server which intern could communicate with Matlab through COM objects. So it is basically possible but it seems a lot of programming needed for such communication. For this reason I thinka ready to use OPC server which communicate with PLCsim shall be available (at least by Siemens). Regards

Suggestion To thank Quote Answer

7/4/2012 5:11 PM	Rate (1)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 9/25/2023 Posts: 6822 Rating: (1349)	Hello, This is discussed here previously .I just translate my words in English: It is possible to connect PLCSIM to SIMULINK.We can use virtual connection between PLCSIM and WINCC .WINCC then would be data provider for SIMULINK. hdhosseini I used WINCC6.0 und STEP7 5.4. Please read this topic (dominant.JPG ): Selecting an optimum sampling time of PID controllers Best regards, Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer

7/4/2012 5:54 PM	Rate (0)
ARN2011 Advanced Member Joined: 7/16/2011 Last visit: 4/10/2023 Posts: 24 Rating: (0)	Dear Mr. Hosseini, Thank you for your reply. So it means that I should find Wincc OPC servers by matlab OPCTOOL command. When I brows the computer on which WinCC is installed i find the following OPC servers: CCOPC.XmlWrapper.1 OPCServer.WinCC.1 OPCServerAE.WinCC.1 OPCServerHDA.WinCC.1 IhaveWinCC and Step7 + PLCsim on one computer and Matlab and (another copy of Step 7+ PLCsim) on another computer. Should all of the componenets installed on one computer? Will it be possible to both read and write data to Simulink (and vise versa) by this method? Thank you very much Best regards

Suggestion To thank Quote Answer

7/4/2012 6:05 PM	Rate (1)
hdhosseini Diamond Expert Joined: 1/28/2009 Last visit: 9/25/2023 Posts: 6822 Rating: (1349)	As I remember read and write are possible and "OPCServer.WinCC.1" will be the case should be selected. Update if something is missing Best regards Hamid Hosseini
	Demo Channel on Youtube
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users ARN2011

3/8/2017 3:57 PM	Rate (0)
Min_Moderator Platinum Member Joined: 9/3/2014 Last visit: 3/13/2019 Posts: 4792 Rating: (123)	New question published by hariirah1907 is split to a separate thread with the subject Plant virtual testing with Tecnomatix and possible PLC connection. Best regards Min_Moderator

Suggestion To thank Quote Answer

10/17/2017 10:57 AM	Rate (0)
Jen_Moderator Moderator Joined: 6/19/2017 Last visit: 9/29/2023 Posts: 7329 Rating: (145)	New question published by Essi_Shahmirzadi is split to a separate thread with the subject How can read and write tag items to plcsim?. Best regards Jen_Moderator
	My Forum is the place to personalize your profile, track your topics, and maintain content that interests you. Best regards Jen_Moderator
Suggestion To thank Quote Answer

|

Share this page:

Share this page on...

Follow us on