Skip to Content

Register Login

Industry Online Support

Technical Forum

Navigation

Problem with a sound Driver of FIELD PG M2

Created by: Vinicius at: 9/20/2009 6:23 PM (16 Replies)

Rating (7)

Thanks 16

Result pages:: |; 1 | 2; |

17 Entries

Entries per page: 10 | all

9/20/2009 6:23 PM	Rate (0)
Vinicius Member Joined: 3/18/2008 Last visit: 1/17/2025 Posts: 2 Rating: (0)	The driver sound of my FIELD PG M2 doesn't works. I'm using WIN XP PROF, SP3,the latest BIOS (V09.01.06), and the correct driver. mlfb: 6ES7713-1BB13-0AF1. Someone could help me?

Suggestion To thank Quote Answer

10/28/2009 11:39 AM	Rate (0)
Titas Posts: 94 Rating: (15)	Hello Vinicius, I have attached the link from where you will get the the information. http://support.automation.siemens.com/WW/view/en/28025703 Titas
Titas Posts: 94 Rating: (15)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users Nordmann73

10/28/2009 8:14 PM	Rate (0)
Vinicius Member Joined: 3/18/2008 Last visit: 1/17/2025 Posts: 2 Rating: (0)	Hello Titas, I used this audio driver, but doesn't works. Thank you!

Suggestion To thank Quote Answer

11/12/2009 8:44 AM	Rate (0)
hahaha Posts: 3 Rating: (0)	Did you solve the problem? I have same problem with you. If so, could you teach me?
hahaha Posts: 3 Rating: (0)
Suggestion To thank Quote Answer

11/12/2009 11:13 AM	Rate (2)
Titas Posts: 94 Rating: (15)	Hi, If you install Windows XP3 then you audio driver will not work. Because Microsoft forget to include the driver of the High defination audio device. Anyway there is solution for that to install the driver in the XPSP3 enviornment. The steps: Download this software : kb888111xp2.exe or It is available in the Driver DVD of the Field PG. Open Start --- Run---- Regedit and go to : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows Find CSDVersion Key Legend: 100 (hex) means its SP1 200 (hex) means its SP2 300 (hex) means its SP3 Change CSDVersion from 300 to 200 and Restart Install kb888111xp2.exe (Microsoft UAA Patch) Change CSDVersion back to 300. Restart Install device drivers Enjoy :) Give me the Reply also.
Titas Posts: 94 Rating: (15)
Suggestion To thank Quote Answer
This contribution was helpful to 3 thankful Users newly memb Danath yas

4/21/2010 12:24 PM	Rate (0)
GuruprasadKS Posts: 4 Rating: (1)	Hello, I had a similar problem with PG type 6ES7713-0AA00-0AD1, which was supplied with WinXP+SP2. After migration to WinXP+SP3 I was unable to install audio drivers. I installed drivers that were supplied with PG type 6ES7713-1BB10-0AD4. I was able to install all drivers and it is working fine. Good Luck, Regards, Guruprasad.
GuruprasadKS Posts: 4 Rating: (1)
Suggestion To thank Quote Answer

8/26/2010 1:49 PM	Rate (1)
segan Posts: 60 Rating: (2)	This didn't worked for me. Plz provide some solution to get the audio drivers for SIMATIC PG with WinXP SP3. Titas Hi, If you install Windows XP3 then you audio driver will not work. Because Microsoft forget to include the driver of the High defination audio device. Anyway there is solution for that to install the driver in the XPSP3 enviornment. The steps: Download this software : kb888111xp2.exe or It is available in the Driver DVD of the Field PG. Open Start --- Run---- Regedit and go to : HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Windows Find CSDVersion Key Legend: 100 (hex) means its SP1 200 (hex) means its SP2 300 (hex) means its SP3 Change CSDVersion from 300 to 200 and Restart Install kb888111xp2.exe (Microsoft UAA Patch) Change CSDVersion back to 300. Restart Install device drivers Enjoy :) Give me the Reply also.
segan Posts: 60 Rating: (2)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users newly memb

8/26/2010 2:17 PM	Rate (4)
Titas Posts: 94 Rating: (15)	Hello, Please check the attach file. Please give me the feedback also. Regards:- Titas Attachment Drivers.zip (1362 Downloads)
Titas Posts: 94 Rating: (15)
Suggestion To thank Quote Answer
This contribution was helpful to 7 thankful Users Neto raymond.chow Ganes10 abvto2 Qspamui Nordmann73 yas

9/1/2010 6:26 AM	Rate (0)
Ganes10 Platinum Member Joined: 8/31/2010 Last visit: 1/27/2025 Posts: 1524 Rating: (230)	This also doesn't work. when hdashcut.exe is opened, nothing happens. Is there any other solution available? Titas Hello, Please check the attach file. Please give me the feedback also. Regards:- Titas
	Like it? Rate it!
Suggestion To thank Quote Answer

11/30/2010 10:39 AM	Rate (0)
Danath Posts: 11 Rating: (1)	I had this problem also and the tip from Titas worked to solve the problem and I have tested the audio and the system and all is working fine for me. Tanx alot Titas, Best regards, Danath
Danath Posts: 11 Rating: (1)
Suggestion To thank Quote Answer
This contribution was helpful to 1 thankful Users umencho

|

Share this page:

Share this page on...

Follow us on