"PUROFIBUS" by "IM308-B"

Hello

I am studying about "SIMATIC-S5."

I want to make the system of "PROFIBUS" using "6ES5308-3UB11."

The configuration of the system is carried out by "COM PROFIBUS V5.1.2.2."

I want to write the contents in "EPROM:6ES5375-1LA21" using "USB-PROMMER:6ES7792-0AA00-0XA0."

It does not perform by being displayed as "MCRDCTRL The memory card is not inserted."

I thought that "EPROM:6ES5375-1LA21" had broken.

By "STEP 5EPROM Programming V1.0", when investigated to the trial, to it, it has been judged that it was normal.

Can I write in ROM, if what is carried out?

I ask of you well.

Can't a configuration do "IM308-B", as for "COM PROFIBUS"?

I mistook. If "COM PROFIBUS" is the inheritor of "COM ET200"

Now, can I get "COM ET200"?

Thank you

Hello

I suggest you to contact with Siemens local center in your place. Look at COM ET 200/COM ET 200/MS-DOS Configuration Tools to Be Discontinued

... Supply of the COM ET 200 and COM ET 200/MS DOS configuration tools will be discontinued as per October 1, 1999. In view of the fact that the tools are used only for the configuration and parameterization of the IM 308-B PROFIBUS DP interface module (6ES5 895-3UB11) which is only available as a spare part on a replacement basis, the COM ET 200 and COM ET 200/MS-DOS
will be deleted from our product range.

But maybe someone has this software in his archves. I'll also try to find in mine.

regards

Mr. UMENCHO,
Thank you for giving a reply

Support of Siemens is not expectable in my country.
Although new "SIMATIC-S7" supports, old "SIMATIC-S5" is not supported.
Since there is no engineer who knows "SIMATIC-S5"

I appreciate your correspondence.

Hello

I found ET200 for Step5. Maybe will be useful for you. This is not DOS version.

regards

Mr. UMENCHO, Thank you

The file was thawed.

How can this "COM ET200" be used if it carries out?

The handling description of "COM ET200" is not found to the site of Siemens.

I am a beginner.

I make you trouble. However, please help me.

I ask of you well.

I tried.
Example of the installation method of other "COM Softwares" was followed.

The holder named "C:\STEP5\S5_SYS\S5_COM\COMET200" was made.
And the thawed file was stored there.
I start "STEP5 / ST V7.23."
"Change -- >Others" -- if it is operated
The display of "COM ET 200 V4.1" appeared.
Although "Start" was clicked

16 bits MS-DOS Subsystem
"STEP5 NTVDM CPU" detected the unjust command.

Such a display appeared and did not start.

An operating system is "the Windows 2000 service pack 3."
"COM ET200" is what environment and can be used?

Isn't my operation enough?

Hello, Mr. UMENCHO

I forgot.
You had told me.
This is not "DOS version."

I start "STEP5 / ST V7.23" on a personal computer.
"Change -- >Others" -- if it is operated .
The display of "COM ET 200 V4.1" appeared.

The hint was shown in this screen.
The appended PDF file is seen.
The portion shown by the arrow

It is displayed as "PG 6x5."

This "COM ET200" is expected.
It is the software for "CPM?" operating systems of "PG 685" etc.

I do not have the knowledge of "PG 6x5."
Thank you.

Hello

I already tried COMET200 with PG740. Everything was OK. Means I just start he software and saw screens with all possibilities. I can't to test it with make settings of IM308B. ( Glad to say that I haven't this IM308B module. ). So my suggestion is to use old OS (Windows 98, even 95) and old version of Step5. Less then v.7.2. ( The PG has Windows 95 and Step 5 v.6.61) .

Hope this helps.

regards